£62.00 / €68.82

INT-400 Interceptor 400 Kit
Interceptor 400 kit (not assembled).

Interceptor 400 kit (unassembled) - it's going to take a it more time to put it together but you are getting a reduction in cost due to the time it takes the factory to partly assemble this item - the choice is yours!

The Interceptor 400 kit is a different class to other kits you may see on the market. Flight tested to death, beautiful stable hover and unrivalled precision control - there is no slop in the design.

CNC centre hub, anodised swashplate slider and finely polished main shaft giving silky swashplate control!

The frame is light weight aluminium and and well thought out - reducing your crash bill drastically. Spares are highly specific and low costs resulting again in a lower spend to repair the helicopter. Main gear is nylon - not plastic making it tougher and smoother.

Specifications
Length: 630mm
Height: 225mm
Main rotor: 558mm
Tail rotor: 150mm
Weight: 300g
Flying weight: 580-620g
Motor gear: Variable
Main gear:138T
Hold rotation gear: 105T
Tail gear:1:9.85:5

IN STOCK





find out more

£39.99 / €44.39

Same Features as Plastic Case G401B but with metal case for added crash protection.
Comes with instructions
find out more

£120.00 / €133.20

Alien Command Advanced
CCPM Flight Stabilisation

More than just a flight stabilisation system...

•Full Alien Command CCPM flight stabilisation.
•120/140 degree swashplates.
•RC latency error reduction.
•Digital servo optimisation.
•CCPM geometry error correction.
•Flybarless system compatible.

How does it compare to other systems?:
Well it’s a lot cheaper, does a lot more, produces much smoother stabilisation and of course is a double edged sword because you can not only improve eCCPM but you can decide to use the stabilisation component or just switch off! Therefore once you are happy without the stabilisation components turn it off/remove it and just utilise all the other benefits to give yourself an exceptional smooth flight control.


Have we tried it?:
Of course we have set the unit using the software provided and it gives and incredible flight experience! Trex 450, 500 in 10mph + wind we could just leave the TX on the floor and leave at an altitude of 80+ meters with minimal drift – we were amazed.



RRP 123.49

REQUIRES INTER / ADVANCED ABILITIES TO SET UP NOT FOR RAW BEGINNERS
find out more

£19.00 / €21.09

Ever wanted to know how fast your motor is spinning?
Wished you could better select the right propeller for your motor?
Now you can more accurately tune and performance test your engine, motor, edf or heli with the Turnigy tachometer.

Measures 2 to 9 propellers.
Super easy to use.
0-99999rpm range

Features:
Ultra sharp backlit LCD
220mah Lion battery included
Auto shut-off when idle. (no more flat batteries)
Weighs only 39g
find out more

£13.75 / €15.26

Stainless gear puller -- for motor pinion/gear Removing
It is ok for motor shaft diameter 0.9-3.5mm
Back in stock now 11-03-10


find out more

£99.95 / €110.94

With the "Cockpit Sport" you can program the GyroBot 900 and GyroBot 700.
The difference between "Cockpit Sport" and "Cockpit" ist in the material of the housing (Cockpit: CNC milled Aluminum with bright chrome finish. Cockpit Sport: Plastic) and the display (Cockpit: blue lighted Display. Cockpit Sport: Display without light)


find out more

£4.40 / €4.88

Outrage G5 Compatable CNC Stabilizer Bracket
Go Blue and allows fitting of G10 or Silver Carbon Horizontal fin!!
find out more

£11.99 / €13.31

Want a different look on your landing skids to plastic skids. Then these 2 x CNC alloy skids are for you

Fully compatible with Align trex T-REX450 & 3DX450 plus some other 450 size helicopters
Same as ALIGN Trex Metal Parts

Specification:CNC Alloy Landing skid x 2
Grub screws locate the landing skids firmly in postion
Aerial hole in one side of skids
Nice Andonised BLUE finish
Long Slots on location part of skids to fit various helicopter sizes.
find out more

£10.99 / €12.20

2-4 cell light activated cell voltage meter · extra led lights for mounting on models · Cell meter detects voltage of each cell · Lights give voltage readings to show the exact voltage of each cell in a pack. · 8 function lights, detecting voltage from 3.4 - 4.1v · Essential kit for all modelllers · The extra 3 bright LEDs can be used to simulate night flying lights on a model, making flying more fun

The 3 lights would be great for the Airwolf model fuselage as it has
find out more

£110.00 / €122.10

This is the iMax B6 Quattro charger.
The iMax Quattro B6 allows you to plug 4 batteries into on charger simultaneously, and it will intelligently and automatically charge all 4 of them at once to their maximum capacity. To top of it, the batteries being charged do not even need to have the same configuration. You can connect different chemistry (ni-mh/Ni-Cd/LiPo/LiFe) batteries into any of the charging ports.

Input: DC 11 to 15V
Power source: 12V DC (car battery)/ AC mains PSU (>200Watts0
Charger power: 50Watts, current is regulated accordingly.
Discharger power: 5 watts, current is regulated accordingly
Cell count: 1-15 Nicd/NiMH cells; 1-6S LiPo/Lilon/LiFe cells; 1-10 Lead-Acide cells (2V to 20V)
Current drain for balancing Lithoum: 300mA
Charge termination: automatic, negative delta peak method for NiCd/NiMh; and automatic, voltage-dependent, CC-CV process
Dimensions: 225.4 x 158.6 x 62.4mm
Net weight: 1.09kg

Includes:
1 x charger
1 x pair alligator clips for Pb battery
1 x alligator to bullet connector cable
1 x JST to bullet connector cable
1 x Futaba to bullet connector cable
1 x Tamiya to bullet connector cable
1 x bullet connector with wire
1 x TP/FP adaptor
1 x XH adaptor
1 x instruction manual

In stock around 25-03-10 pre order
find out more

£135.00 / €149.85

This is a multi blades rotor head special for the scale helicopter It design no swash-plate lock (follower) require .The total hight of the centre hub only 35mm ,It make your model great scale look and C/G lower for sport preformance .
Fits 500 size Helicopters for that great Scale look
Try pairing with the Gyrobot 700 Stabiliser


find out more

£199.99 / €221.99

Our New 500 size flybarless head comes as shown with an outrage Swashpalte fits most 500 Heli;s fits T Rex 500 SX 500 Lepton etc as shown

Supplied with Gaui GU365 stabi wroks great
find out more

£13.75 / €15.26

Stainless gear puller -- for motor pinion/gear Removing
It is ok for motor shaft diameter 0.9-3.5mm
Back in stock now 11-03-10


find out more

£17.99 / €19.97

New March 2010 Sonix 325mm Carbon Fibre and white painted main Blades for 450 helicopters
Nice finishand well balanced right from the start
find out more

£460.00 / €510.60

The Apache AH-64A is the world first 600 size scale attack helicopter .It design by computer and precision cnc machine .Cnc machine provid detail panel line and precision scale .The kit included the base weapon set and cnc matel suspension front and rear scale landing gear ,The kit included special metal side main frame for Align 600 , Bullet -600 or any clone 600 .Also suitable for Logo-400/10 ,Swift-16 .The detail front sensor ,dummy machine gun are included .Factory painted military green colour .Two piece fuselage are easy and lower cost for shipping .
TFM-600-4 blades rotor head are perfect match for this model .

Length:1450 mm
width:360 mm
High:500 mm
28-02-10 in stock now
find out more

£12.00 / €13.32

Great Compact set of tools for your Dremel

Low cost and handy to use
find out more

£39.99 / €44.39

Same Features as Plastic Case G401B but with metal case for added crash protection.
Comes with instructions
find out more

£34.99 / €38.84

Selection of tools in attractive and practical tool box. Branded under the Helivol logo.
Product Specification:

Includes:
Pitch Gauge
Wire Cutters
Pliers
Ball Link Pliers
4.0mm Socket Driver
5.5mm Socket Driver
1.5mm Hex Driver x 2
2.0mm Hex Driver
2.5mm Hex Driver
Phillips Driver x 2
Flat Head Driver

find out more