400-450 Size Flybarless Head fits T Rex, 3DX450, Mini Titan, Blade 400

Flybarless head system provides 15% more power and less parts for Outrage G5 helicopters and T-REX 450 helicopters
Drop in replacement for all 450 size helicopters T Rex 450 & 3DX450 plus Super Hero etc Fits Outrage G5 check our prices compared to Outrage prices !!
Precision CNC aluminum with cool black anodizing colors
High quality bearings

Includes
- CNC aluminum Main Blade grips
- CNC aluminum Center Hub
- Fiber Swashplate DriveCNC aluminum washout base and arms
- CNC aluminum swashplate
- New linkages rods
- Hardened spindle shaft and main shaft


Can be used with the GAUI Flybarless E-Stabilizer GU-365 for complete control.
This Flybarless head and Gaui Gu365 in 3D action by our own test pilot Erich of the Netherlands click to see HD video

Note we have fitted this Flybarless head with very little modification to our Mini Titan E325 with sucess.

Assembly Instructions each of the links below will allow you to download instructions. paste the link in your browser to view

http://www.sportsmoto.co.uk/flybarless-head-1.jpg
http://www.sportsmoto.co.uk/flybarless-head-2.jpg Large Image of Head Click Here

Alien Command Advanced
CCPM Flight Stabilisation

More than just a flight stabilisation system...

•Full Alien Command CCPM flight stabilisation.
•120/140 degree swashplates.
•RC latency error reduction.
•Digital servo optimisation.
•CCPM geometry error correction.
•Flybarless system compatible.

How does it compare to other systems?:
Well it’s a lot cheaper, does a lot more, produces much smoother stabilisation and of course is a double edged sword because you can not only improve eCCPM but you can decide to use the stabilisation component or just switch off! Therefore once you are happy without the stabilisation components turn it off/remove it and just utilise all the other benefits to give yourself an exceptional smooth flight control.


Have we tried it?:
Of course we have set the unit using the software provided and it gives and incredible flight experience! Trex 450, 500 in 10mph + wind we could just leave the TX on the floor and leave at an altitude of 80+ meters with minimal drift – we were amazed.

Set Up Instructions CLICK

RRP 123.49 More set up Information Click

Same upgrade Parts in BLACK CNC alloy as Outrage G5 kit.
Convert your Outrage G5 head to flybarless with this kit. Plenty of online instruction on how to fit and use flybarless heads available. Details on how to fit head will be mailed after purchase.

Includes:
- CNC aluminum Center Hub
- CNC aluminum washout arms
- Fiber swashplate drive
- Linkages ends
- Dampers
- Linkages

Convert Outrage G5 helicopters into powerful flybarless machine
Larger Image of Flybarless kit for G5 Outrage

Flybarless - Spares - Swashplate
Will also fit 3DX450B and also T Rex versions

Flybarless - Spares - Main Shaft- Fits T Rex 450, 3DX 450, Superhero, and other 450 helicopters

Flybarless - Spares - Mini Titan Mainshaft option.

Flybarless - Spares - Bush 1 x 5mm int dia - Fits T Rex 450, 3DX 450, Superhero, and other 450 helicopters

Flybarless - Spares - Swashplate to Head Connection rods

Flybarless - Spares - G10 Guide Plate

Flybarless - Spares - CNC Alloy T Hub (No Rubbers included)

Flybarless - Spares - Black Hard Dampers for Flybarless Head

Flybarless - Spares - GREEN softer Dampers

Flybarless - Spares - Slide Block CNC Alloy

Flybarless - Spares - Arm with Bearings fitted
Pt Number G580 CFL -W6

Flybarless - Spares - Arm with to Swahplate spare

Flybarless - Spares - 2 x Connection Balls with Screws

Flybarless - Spares - 1 x Head Button Black with mounting screw

Flybarless - Spares - 2 x main Blade grips with parts as shown in Image
1 x 4mm feathering spindle included in deal
(no thrust bearings in deal)

Flybarless - Spares - 1 x 4mm Feathering Spindle

Flybarless 2 x 4mm alloy washers for 4mm feather spindle

Flybarless - Spares - 2 x Thrust Bearings for 4mm Feathering spindle fit

The instructions for fitting are available after purchase of the item by digital download service More...

It's the same SONIX Head that is being fitted to the Outrage G5 Helicopter. Check out this video clip of the G5 Flybarless head parts we sell the Kit and the complete head . Outrage Fitting Instructions for Flybarless compare parts etc

Minimum alteration to complete SONIX Flybarless head required to install.
Main Titan shaft had to be ground down in length 0.3mm to align Jesus bolt.
Balls on swash swopped for smaller dia balls from Titan
Anti Rotation swapped ovwer from orginal swash
Rod lengths altered to fit head
Travel at least 15' each way !! intially - too much but adjusted on pitch in radio to set -9 +9'
Flew first flight NO Stabiliser !!
See larger images of the Flybarless Head fitted to the Mini Titan E325 click here
flying the Mini Titan with flybarless head click here You Tube Video

You Tube Video Link click here

What are the advantages of converting to flybarless?

- Less weight
- Longer flight times for electric helis
- Far less linkage slop
- Ability to give faster cyclic rates, without losing stability
- Lower rotor head repair costs
- Adjustable flight characteristics
- Cleaner, less model like appearance
- Quieter, more realistic rotor sound

What are the advantages over using weighted blades for flybarless?

- You can use a wide variety of stock rotor blades
- Safety: you don’t have to glue lead weights into the tips (which could become bullets)
- Without gyros to assist, a flybarless heli can behave oddly, such as pitching up in forward flight
- A digital flybar provides a locked-in feel similar to Heading Hold, rather than just the rate-damping effect of heavy blade tips.