£7.99 / €8.87

Fly the flag with a Union Jack FG canopy for 450 size helicopters.
Fits T Rex , Superhero, Shark 450, 3dx 450b and many more 450 size helis

This will NOT fit the Mini Titan helicopter
find out more

£13.45 / €14.93

This item uses the 3mm feathering spindle
find out more

£4.80 / €5.33

HP 30-50 Tail Blades
Our Helicopter tail blades are created using a complex combination of
materials which provide the perfect mix of strength and flexibility. The blades have a
very large surface area, yet weigh very little.
The next larger is the 84mm for the 30/50 size helicopters weighing just 3.8g.
Weight is per blade.


find out more

£2.99 / €3.32

Comes as a pack of 2 x items with the grub screws to suit
This item suits the un weighted paddles that come as standard with the 3dx450 kits
Fits shogun 3dx 400 / 450 walkera 35 CNC flybar weights - B

find out more

£3.50 / €3.89

2 x items included these are the longer steel ones not the kit short items. Perfect for the Fiberglass canopys.
find out more

£4.30 / €4.77

UGL-57 Main Gear 3DX500 SAH/SAS/SEV2/V1
find out more

£2.99 / €3.32

UGL-37 Main Shaft 3DX 500 SAH/SAS/SEV2/V1
find out more

£6.35 / €7.05

Instructions:
?PU adhesive gel is a material that possess excellent vibration dampening characteristics, ideal for mounting gyroscopes, receivers, or other electronics in vibration prone areas. The gel can be re-used by cleaning off containment (such as dust) with water. Mild detergent can also be used to wash away oily residues. Once dried the gel will regain its adhesiveness. The PU adhesive gel is an ideal replacement for traditional gyro foam tape. Its excellent vibration dampening characteristic can minimize impact induced damages on electronics.

Specification:
?Material:PU
?Size:110x55x3mm

Accessories:
?PU adhesive gel x 1
?Hook & loop fastening tape x 2

PU Adhesive Gel
K10457A

find out more

£2.35 / €2.61

Well, its not really tape, its a whole 10 x 5 inch sheet of double sided mounting foam.
Great for mounting gyros, servos, receivers and much more!
Made with super sticky hot-melt glue ensuring a secure contact with almost any surface.
Just peel and stick!

Size: 252 x 127 x 4mm (10 x 5 x 0.15inch)

SOON to Be in Stock 04-11-09 (aprox 15-10-09)
find out more

£49.50 / €54.95

Model: Air Wolf cnc suspension landing gear
Description: This is special design from our Air Wolf 500 fuselage .Especially absorb force of gravity suspension string design .The landing gear from our precise CNC machine .it can easy install and use a micro servo control linkage and safty locked system .All cnc aluminium control arm are included .It can replace to Align ,Heliartist ,Century-rc .(Wheels not included)



find out more

£110.00 / €122.10

This is the iMax B6 Quattro charger.
The iMax Quattro B6 allows you to plug 4 batteries into on charger simultaneously, and it will intelligently and automatically charge all 4 of them at once to their maximum capacity. To top of it, the batteries being charged do not even need to have the same configuration. You can connect different chemistry (ni-mh/Ni-Cd/LiPo/LiFe) batteries into any of the charging ports.

Input: DC 11 to 15V
Power source: 12V DC (car battery)/ AC mains PSU (>200Watts0
Charger power: 50Watts, current is regulated accordingly.
Discharger power: 5 watts, current is regulated accordingly
Cell count: 1-15 Nicd/NiMH cells; 1-6S LiPo/Lilon/LiFe cells; 1-10 Lead-Acide cells (2V to 20V)
Current drain for balancing Lithoum: 300mA
Charge termination: automatic, negative delta peak method for NiCd/NiMh; and automatic, voltage-dependent, CC-CV process
Dimensions: 225.4 x 158.6 x 62.4mm
Net weight: 1.09kg

Includes:
1 x charger
1 x pair alligator clips for Pb battery
1 x alligator to bullet connector cable
1 x JST to bullet connector cable
1 x Futaba to bullet connector cable
1 x Tamiya to bullet connector cable
1 x bullet connector with wire
1 x TP/FP adaptor
1 x XH adaptor
1 x instruction manual

In stock around 25-03-10 pre order
find out more

£135.00 / €149.85

This is a multi blades rotor head special for the scale helicopter It design no swash-plate lock (follower) require .The total hight of the centre hub only 35mm ,It make your model great scale look and C/G lower for sport preformance .
Fits 500 size Helicopters for that great Scale look
Try pairing with the Gyrobot 700 Stabiliser


find out more

£199.99 / €221.99

Our New 500 size flybarless head comes as shown with an outrage Swashpalte fits most 500 Heli;s fits T Rex 500 SX 500 Lepton etc as shown

Supplied with Gaui GU365 stabi wroks great
find out more

£13.75 / €15.26

Stainless gear puller -- for motor pinion/gear Removing
It is ok for motor shaft diameter 0.9-3.5mm
Back in stock now 11-03-10


find out more

£17.99 / €19.97

New March 2010 Sonix 325mm Carbon Fibre and white painted main Blades for 450 helicopters
Nice finishand well balanced right from the start
find out more

£460.00 / €510.60

The Apache AH-64A is the world first 600 size scale attack helicopter .It design by computer and precision cnc machine .Cnc machine provid detail panel line and precision scale .The kit included the base weapon set and cnc matel suspension front and rear scale landing gear ,The kit included special metal side main frame for Align 600 , Bullet -600 or any clone 600 .Also suitable for Logo-400/10 ,Swift-16 .The detail front sensor ,dummy machine gun are included .Factory painted military green colour .Two piece fuselage are easy and lower cost for shipping .
TFM-600-4 blades rotor head are perfect match for this model .

Length:1450 mm
width:360 mm
High:500 mm
28-02-10 in stock now
find out more

£12.00 / €13.32

Great Compact set of tools for your Dremel

Low cost and handy to use
find out more

£39.99 / €44.39

Same Features as Plastic Case G401B but with metal case for added crash protection.
Comes with instructions
find out more

£34.99 / €38.84

Selection of tools in attractive and practical tool box. Branded under the Helivol logo.
Product Specification:

Includes:
Pitch Gauge
Wire Cutters
Pliers
Ball Link Pliers
4.0mm Socket Driver
5.5mm Socket Driver
1.5mm Hex Driver x 2
2.0mm Hex Driver
2.5mm Hex Driver
Phillips Driver x 2
Flat Head Driver

find out more