Flybarless Gyro System Gaui

FES gyro is very very easy in setting, customer just have to finish all setting on his
transmitter, then connect the gyro and receiver and set a switch for initialization, all data on the transmitter will be programed into the FES gyro immediately, if he wants to change the initial setting, just adjust it on the transmitter and set the switch again for initialization, and for the most important thing.

And the customer do not even have to buy the tail gyro such as Futaba GY-401 for his heli, because the FES gyro come with 3-Axis gyro and the tail gyro is also
included.

The GU-365 GYRO come with new Piezo V2 that does not drift like others, but this gyro
is not suitable for the Nitro power helis because nitro engines result more vibrations.

The GU-365 come with 3 gyro elements, it means that customers do not have to buy a extra tail gyro for the heading hold tail control, and it is also compatible for the auxiliary tail gyro such as Futaba gy-611 for those top pilots. please refer to the instruction manual for the wiring.

Specifications :
Control system : AHDCS (Active Helicopter Digital Control System)
Content : 3-Axis gyro
Operating voltage : 4 ~ 6V DC
Dimensions : 44.5 x 31 x 14mm
PDF information sheet link

Information on set up and flight use

Video footage of the Gaui GU365 performing 3D our own TEST Pliot Erich Gaui GU365 in 3D action by our own test pilot HD video click me More...information on Gaui GU365 set up

Read Helista's helpful guide to setting up the Gaui GU365 click here

By Kevin Clouser (Rotorhead58d) I am an average guy. My heli flying skills are limited to circuits, loops, rolls, etc. I don’t own expensive heli’s, or any exotic set up equipment. I have always wanted to try and build a flybarless heli, but my income has prevented it...until now.
Enter the Gaui GU-365 3 axis gyro system. This unit is priced under $200.00 and is widely available. Gaui, and many other companies have entered the flybarless market in a big way. They offer complete flybarless conversion kits, or you can set up your existing head and just buy the 3 axis gyro. Gaui also sells complete kits all ready to go flybarless.
Before you do anything, I would suggest educating yourself on how a flybarless system works. Make sure you are very familiar with the mechanics involved, and ask questions from guys that already have done the mods to their heli’s. So far, I have built 2 flybarless heli’s with the GU-365 controller. Both have turned out very nicely. I am no authority on flybarless set up’s, and have no friends that are near me to help. read more at Helista Magazine