£15.99 / €19.03

esigned to fit nearly all transmitter antenna positions and allow for a neck-strap, the new TURNIGY transmitter glove is a must have item for low temperature flying conditions.

ade with a heavyweight zip, durable transparent cover that wont get brittle in sub zero temperatures and padded cotton/nylon material to insulate and protect against wind, snow and light rain.

You now have one less excuse to avoid getting outside and flying your model aircraft.

Spec.
Maximum transmitter size: 270x270mm
find out more

£19.00 / €22.61

Ever wanted to know how fast your motor is spinning?
Wished you could better select the right propeller for your motor?
Now you can more accurately tune and performance test your engine, motor, edf or heli with the Turnigy tachometer.

Measures 2 to 9 propellers.
Super easy to use.
0-99999rpm range

Features:
Ultra sharp backlit LCD
220mah Lion battery included
Auto shut-off when idle. (no more flat batteries)
Weighs only 39g
find out more

£11.30 / €13.45

Deluxe Swashplate Leveler - T-REX 700N Colour may vary 12mm shaft so fits other helicopters other than T Rex 700
The new DELUXE swashplate leveler is designed to level the swashplate without eyeballing and guessing. It is used for T-REX 700 Nitro helicopters and others . Due to its heavy weight, the new version is designed with top finger rest and ergonomics handle to falcilitate the leveling job.

The NEW DELUXE swashplate leveler is made of aircraft aluminum 6061-T6, 100% by CNC machine with highest tolerance to avoid play between the main shaft and the inside of the swashplate leveler which can cause unleveling and inaccuracy in checking leveling. The NEW DELUXE swashplate leveler is also anodized in Silver to avoid corrosion.

Designed to work with an 12mm Main Shaft.


find out more

£11.99 / €14.27

The all new Turnigy temp checker now handles temp up to 356F! making it also reat for hot glow/gas engines!
Our Turnigy Infrared Thermometer can check the temperature of any Motor, ESC or battery simply by pointing and pressing the button. There is no need to make contact with the object!
An excellent way to check battery or motor temps!

Specifications.
Measuring Range : -33~180C (-27.4~356F)
Operating Range : 0~50C (32~122F)
Full Range Accuracy : +/- 2.5C, 2.5%
Distance :2~40cm
Emissivity Range : 0.95 fixed
Wave Length : 5um~14um
Power Supply : LR44X2

Display shown in Celsius/Centigrade & fahrenheit.
find out more

£292.00 / €347.48

Upgrade:
S VERSION nOW SUPPLIED
*GAUI 10A ESC X 4
*SCORPRION Brushless Motor 1050KV X 4



330X was designed based on UAV , which emphasizes
the advantages are:
1.Flight Efficiency: Standard Battery
(2S2000mAh) time of flight for more than 12min, with a high-capacity battery,
the flight time will be more than 20 min or more
(available spreadsheet calculation)
2.Excellent wind resistance: the efficiency and load of propeller are perfectly optimized,
so the wind resistance will be better than general electric aircraft High stability:
contains GU344 (three-axis stabilizing system)for the beginner or the FPV flying,
it is a very stable Vehicle.
3.Additional payload capabilities: payload up
to 700g (including battery), can freely install
cameras and video recorder, and other general
system.
4.System Extensibility: can be used with GPS
positioning system and navigation system on
330X without any change
5.Operation mode and flight characteristics with
the same helicopter, but no complex transmission
6.Collapsible body design, greatly reduce the damage rate,Which can be repaired
easily without adjustment.
About the sport and beginner mode, we had indicated it on instruction
manual, in fact, we have 2 flying mode for the 330X, one is Cruise Mode "CRU" for experienced
pilots, in this condition, the 330X will be very similar to normal helicopter, and another one is
Hover Mode "HOV" for beginner to pract in hovering.

Let me explain it clearly, in the Hover Mode, the heli will not go forward if you release the
control stick to let the stick back to the neutral position, it means that even if you fly forward
with some speed, the heli will stop moving in very short period of time and then hover in the
position it is, but if you fly it in the Cruise Mode, the 330X will keep moving forward some
distance even if you release the control stick to let it back to neutral position, it is similar
to helicopters that it is still going to the direction where it used to be.

I do not mean the 330X is able to hover by itself in Hover Mode, the only difference between those
2 modes only can be feel in moving, especially in fast moving the 330X in the air.

TEMP OUT OF STOCK 29-07-10
find out more

£22.00 / €26.18

T-REX500/550 Helicopter Big Size Training Kit with Metal Hub
Good solid training gear system to help you with those intial flights

Specification :

Length of each rod : 460mm

Diameter of the rods : 6mm


find out more

£99.00 / €117.81

New BLACK Version of 3DX500 SE V3 head assembly.
find out more

£23.40 / €27.85

Works with any model that has a threaded hole in the center of the head block. Including but not limited to:
T-rex 450
T-rex 500
T-rex 600
T-rex 700
Miniature Aircraft Stratus (and others with threaded hole)
(Adapter for the Miniature Aircraft Tempest will be available soon)
JR Vibe and Vibe 50
Hirobo Evo 90

Holds the flybar level while allowing the head to turn and pitch to be changed.

Unique standoff allows use on head blocks with a radius such as the T-rex 450 and 500.

Precisely indicates whether the swashplate is level or not.

Detects static CCPM interaction.

Not loads cheaper than other tools like flybarlock... compare our prices to others
Note 'Flylock ' is exclusive to Sportsmoto Ltd UK

find out more

£14.99 / €17.84

Boxed Vernier Caliper (digital with battery included.
Great Value
Tech Spec
Resolution 0.01mm
Power 1.5V LR44 Button battery
Display reaction Time 1.5m/s
Weight Aprox 150g
Metric and Imperial ranges
Extends to maximum size of 150 mm
Warranty of manufacturer 5yrs

Actual vernier caliper may vary than box image but same functions and accuracy
find out more

£2.45 / €2.92

Auto rotation case bearing10x15x4 (2pcs) - HC500SE-73





find out more

£1.99 / €2.37

TL-262 Thread Locker & Sealant High Strength

TL-262 Thread Locker & Sealant High Strength
Fast cure time, used for Fixing and sealing of threaded fastener size M10~M20
find out more

£3.40 / €4.05

5 Minute Quality Epoxy Glue
Minute A/B Epoxy Glue.
A very high quality clear setting epoxy glue.
Excellent gap filling and bonding properties on almost all surfaces including delicate foam and hard to bond alloy.

Product comes in sealed air-tight packaging.
You wont find a better quality epoxy from China. In fact, its possible to find 20cent epoxy glues of the same size, however they dont dry clear and their holding strength and adhesion is very poor.
Our glue is produced by MIRA, one of Chinas leading glue manufacturers who supply glues to Chinas aerospace and civil engineering market, requiring strict quality and performance guidlines.
Save yourself the headache and only purchase quality glues.

An essential item for any building project and perfect for emergency in-field repairs
find out more

£320.00 / €380.80

Imagine you are the pilot of an aircraft that flies like a dragonfly, and with an on-board video camera, you see exactly what the pilot sees. By tilting your iPhone you control the AR.Drone, and by releasing it, the Drone is instantly stabilized.

The AR.Drone is the result of a high tech development: the quadricopter, a helicopter that is extremely easy to fly. It is controlled by means of micromechanical accelerometers, gyros, ultrasonic sensor, two video cameras, combined with a powerful embedded Linux platform. All of these technologies have been combined for the first time by Parrot’s engineers to create the first fully-integrated Augmented Reality device: the Parrot AR.Drone.

The first quadricopter for video games and piloted by Wi-Fi
E3, Los Angeles -- 15 June 2010 - Parrot, leader in wireless peripherals for mobile phones, today unveils at E3 Expo in Los Angeles the final version of the Parrot AR.Drone, a quadricopter using augmented reality and piloted with an iPod touch®, an iPhone® or an iPad™.

WE HAVE A SMALL INTIAL QTY ON BACKORDER WITH OUR SUPPLIERS. IF YOU ARE INTERESTED PURCHASING ONE OF THESE PLEASE CONTACT US SALES@SPORTSMOTO.CO.UK

WE HAVE TO PAY A PREMIUM RIGHT NOW TO GET THEM , HENCE THE PRICE.

find out more

£57.49 / €68.41

Instructions:
1.The 500M motor features shelterless design to create the advantages of heat release and low temperature variant.
The extended diameter for the rotor make it even more efficiency and high torque output.
2.The 500M motor armature had a special balance adjust to improve the serious shaking problem that other tiny motors have.
3.Maintenance free, high torque, high efficiency, stable and quiet.
4.High-speed ball bearings, powerful magnetic outrunner rotor.
5.Suitable for Trex 500 helicopters. Suggested motor pinion gear: 12T for normal flights and 13T for 3D flights.

Specification:
Input voltage:DC11.1V-22.2V 3-6cell Li-Po
Max continuous current:60A/70A(30sec)
Max output power:1260W/1470W(30sec)
KV value:1600KV
Dimension: spindle 5x36x61.1mm
Weight: 205g (prox.)

Accessories:
Socket screw(M3X10)X2
Washer(F3XF8X1)X2
plus
ALIGN standard 4mm gilt terminal x 3set(Max. current 80A)


find out more

Materials: Aluminum 7075 and stanless steel
Status: Pre-assembled and ready to be intalled

Included:

1.3pcs CNC Tail Blades Grip
2.CNC Tail Rotor Hub
3.CNC Tail Case
4.CNC Belt Gear
5.Belt Gear Shaft
6.CNC Tail Pitch Control Lever Set
find out more

This pentad-blade rotorhead is designed for helicopters, its main shaft diameter is 8mm.
Materials: Aluminum 7075 and stanless steel
Status: Pre-assembled and ready to be intalled

Included:

1.5pcs CNC Blades Grip
2.CNC Rotor Hub
3.CNC Swashplate
4.CNC Arm Set
5.CNC Washout Base
6.Ball links
find out more

£159.99 / €190.39

The Turnigy® V-Bar 600 (v3) is an extremely high quality precise controller and stabilizer for the swashplate and tail rotor of a model helicopter flight control system. It has super-stabilization and highly responsive-to-control input. This makes for incredible stability and agility. The programmability allows for performance settings from smooth scale to sport or hard 3D flying. Flybarless also means longer flight times and a tremendous reduction of parts and aerodynamic drag. You no longer need to use an external tail gyro, resulting in reduced weight and cost savings. The Turnigy® V-Bar 600 offers 4 switchable flight modes.
Bundled with the V-Bar system is a programming box. Making setup a painless experience.

Specification:
MEMS Gyro Sensors in three axes
Digital signal processor
Operating voltage: 4-10 Volts, current < 80mA
Temperature range: -10°C to +50°C
Size: 33x34x18mm
Weight: 15g
Servo compatibility: 1520uS/333Hz, 1520uS/250Hz, 1520uS/167Hz and 760uS/333Hz digital servos, 1520uS/71Hz Analog servo.
Included;
Turnigy® V-Bar 600 (v3) Flybarless System
LCD programming Box
Double-sided adhesive foam & Stainless steel plate.

IN STOCK 14-06-10



Manual Link Try this
http://www.sportsmoto.co.uk/Turnigy-v-bar-600/962877048X39484X53.pdf
find out more

This tri-blade rotorhead is designed for helicopters,its main shaft diameter is 8mm.

Materials: Aluminum 7075 and stanless steel
Status: Pre-assembled and ready to be intalled

Included:
1.3pcs CNC Blades Grip
2.CNC Rotor Hub
3.CNC Swashplate
4.CNC Arm Set
5.CNC Washout Base
6.Ball links

find out more

£64.00 / €76.16

Designed to Fit
T-rex 450SEV2,
T-rex 450SPORT,
T-rex 450PRO
450 Size............

Shaft Dimension : 5mm

including 120 CCPM swashplate / 4PCS Metal main blade grip / CNC Rotor Hub / CNC Washout Base / CNC Arm Set / Main Shaft

Pre-assembled and ready to be installed

Included :

1. CNC Rotor Hub
2. CNC Blades Grip x 4
3. CNC Washout Base
4. CNC Arm Set
5. CNC Swashplate
6. Main Shaft
7. Ball links

Limited qty in stock 15-06-10
find out more

This tri-blade rotorhead is designed for helicopters, its main shaft diameter is 10mm.
Materials: Aluminum 7075 and stanless steel
Status: Pre-assembled and ready to be intalled
Included:
3 pcs CNC Blades Grip
CNC Rotor Hub
CNC Swashplate
CNC Arm Set
CNC Washout Base
Ball links

find out more

find out more

Brand New to our web site for 2010 the 3,4,5 blade 600 heads (5 blade vesion shown here)
Substantially engineered to a high standard and coating the Sportsmoto Ltd heads will be for sale very soon. We are currently testing this head on our T Rex 600 E for a scale project for a customer build.

For all enquires please contact us

Manufactured in Aluminium Alloy 7075 material

ALL PRODUCTS LISTED BELOW WITH NO BUY IT BUTTONS ARE COMING SOON
find out more

£12.70 / €15.11

T Rex 450 Pro Canopy D

Also fits HK 450 GT Pro
find out more

£12.70 / €15.11

Fits T Rex Pro
Also fits HK 450 GT Pro
find out more

£9.70 / €11.54

Fiberglass Canopy for Thunder Tiger Mini Titan Style 3
find out more

find out more