Futaba Servo Range

The Mini Digital S9650 is the ultimate 3D Tail / rudder digital servo for Micro / Mini and mid size Helis such as the T-Rex, Zoom, Shogun, ECO, Logo, Eolo and others. With a super quick digital response of 0.11 Sec / 60 Degrees and torque capacity of 62.5 oz-in the S9650 is extremely digitally precise and so its quick enough to insure crisp 3D control. T-Rex flyers will especially appreciate the S9650 as it is the servo of choice for best rudder control & stability.

Control System: +Pulse Width Control 1520usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.14sec/60 degrees at no load
Operating Speed (6.0V): 0.11sec/60 degrees at no load
Stall Torque (4.8V): 50 oz/in. (3.6kg.cm)
Stall Torque (6.0V): 62.5 oz/in. (4.5kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Counter Clockwise/Pulse Traveling 1520-1900usec
Motor Type: Coreless Motor
Potentiometer Drive: Indirect Drive
Bearing Type: Dual Ball Bearings
Gear Type: All Nylon Gears
Connector Wire Length: 12"
Dimensions: (43 x 15 x 28.6mm)
Weight: .92oz. (26g)

Latest tail servo from Futaba, more torque and faster than the 9253 full size servo for Raptor , 3DX500 etc
0.06sec @ 4.8v
3.4kg-cm @ 4.8v
weight 49g

Larger Image of Servo

Ideal Tail servo for use on models such as the Align T-Rex 450. complemens the GY401 and CSM420E gyros perfectly but can of course be used with most other gyros.

Speed : 0.08 Sec. / 60º degree at 4.8 V,
Torque: 2.0 kg-cm at 4.8 V,
Size: 35.5 X 15 X 28.6 mm,
Weight: 26 g