Gaui 200 Kits NEW V2 Model

The only and the tiniest flybarless micro helicopter produce the most powerful and the best 3D performance in this size.
Suitable for GAUI GU-365 FES gyro (Flybarless E-Stabilizer System).
Only a short time needed for completion. (95% factory assembled)
Preassembled kit comes with BL motor and 18A ESC.
New CF (1mm) upper mainframe set which is suitable for micro or hi-torque sub-micro servo.
New CF (1mm) lower mainframe set and bottom plate produce more space for installing and adjusting the GAUI GU-365 FES gyro.
Equipped with CNC Universal Battery Plate provides more options to the C.G. adjustment and the installing of electronic gears.
New CNC Alu Tail Gear Case and Double Joints Tail Slider produce precision and the best tail control.
New CNC Tail Pitch Link Set with 4 Bearings which is limited edition for H200SE and H200FES version.
New Auto-rotation Main Gear Set with One Way Bearing (Belt driven).
New CNC Mast Mount.
New CNC Integrated Tail Boom Clamp and Middle Mount
New CF Fin and Tail.
New light-weight fiber glass painted canopy.
High Performance Tail Rotor Blades.
High Rigidity Landing Gear Brace.
Extensive Multi-Blade Heads (2Blade~5Blade) and Scale Bodies available.
Items needed for assembly:

Overall length: 415mm (including cabin & canopy)
Main rotor diameter: 428mm
Tail rotor diameter: 100mm
Motor: KV4800 brushless motor (included)
ESC : 18A ESC (included)
Flying weight: 265g ~ 285g (It may vary according to size of a battery pack and R/C gears.)
Main rotor blades: 200mm SP Blades(included) or Wooden(option)
Flying duration: 5~6 minutes with 7.4v/800mah Li-Po battery
Items needed for assembly:

6 (or more) channel heli-capable transmitter (with CCPM function)
3 hi-torque Sub-micro or Micro servos for CCPM (Recommendation : Speed faster than 0.15sec/60 deg, Torque higher than 1.5kg/cm)
1 Micro Digital servo for tail control.
6 (or more) channel micro receiver
GAUI GU-365 FES gyro (Flybarless E-Stabilizer System)
Battery : Li-Po battery (7.4v~11.1v/800mah/15C or more)
Charger: Li-Po battery charger
Image of Flybarless Head assembly click here

The only and the tiniest flybarless micro helicopter produce the most powerful and the best 3D performance in this size.
Suitable for GAUI GU-365 FES gyro (Flybarless E-Stabilizer System).
Only a short time needed for completion. (95% factory assembled)
Preassembled kit comes with BL motor and 18A ESC.
New CF (1mm) upper mainframe set which is suitable for micro or hi-torque sub-micro servo.
New CF (1mm) lower mainframe set and bottom plate produce more space for installing and adjusting the GAUI GU-365 FES gyro.
Equipped with CNC Universal Battery Plate provides more options to the C.G. adjustment and the installing of electronic gears.
New CNC Alu Tail Gear Case and Double Joints Tail Slider produce precision and the best tail control.
New CNC Tail Pitch Link Set with 4 Bearings which is limited edition for H200SE and H200FES version.
New Auto-rotation Main Gear Set with One Way Bearing (Belt driven).
New CNC Mast Mount.
New CNC Integrated Tail Boom Clamp and Middle Mount
New CF Fin and Tail.
New light-weight fiber glass painted canopy.
High Performance Tail Rotor Blades.
High Rigidity Landing Gear Brace.
Extensive Multi-Blade Heads (2Blade~5Blade) and Scale Bodies available.
Items needed for assembly:

Overall length: 415mm (including cabin & canopy)
Main rotor diameter: 428mm
Tail rotor diameter: 100mm
Motor: KV4800 brushless motor (included)
ESC : 18A ESC (included)
Flying weight: 265g ~ 285g (It may vary according to size of a battery pack and R/C gears.)
Main rotor blades: 200mm SP Blades(included) or Wooden(option)
Flying duration: 5~6 minutes with 7.4v/800mah Li-Po battery
Items needed for assembly:

6 (or more) channel heli-capable transmitter (with CCPM function)
3 hi-torque Sub-micro or Micro servos for CCPM (Recommendation : Speed faster than 0.15sec/60 deg, Torque higher than 1.5kg/cm)
1 Micro Digital servo for tail control.
6 (or more) channel micro receiver
Battery : Li-Po battery (7.4v~11.1v/800mah/15C or more)
Charger: Li-Po battery charger

GREAT JULY 2009 DEAL GAUI GU-365 INCLUDED Image of Flybarless Head assembly click here

HELISTA SAYS ...

The new Gaui 200 SE V2 black kit. What’s the big deal you may ask?

Well it’s black, but along with the new frames there’s more than meets the eye. Lets take a look at the surface before we get deeper into the latest 200 class offerings from Gaui.
The frames are black G-10. They’re light, strong and more than capable of handling the beating the 200 dishes out. Advantages of G-10? Cheaper and dielectric, in other words it will cost less and won’t carry a current through the frame. Definitely a plus with a helicopter this small where all the electronics are in close proximity to each other.
The next obvious change is the Black anodized finish on all the CNC components. The entire head and tail are anodized black save for a few polished aluminum millings that give bright contrast and detail. We likey.

Specfication is the same as the EP200SEV2 below apart from frame is G10 and head , tail in BLACK CNC alloy

New 5600KV motor (GM-201)
Metal part with anodized black
Black fiber frame
New tail push rod included

Helista Review Link click here

Great Rear view shot of Gaui Black click here

The only and the best 3D capable micro helicopter reduces the 3D flying cost (Even 7.4V/2S1P/LiPo battery can provide the most powerful maneuver than other helicopters which use 11.1V/3S1P/LiPo battery in this class).
Only a short time needed for completion. (95% factory assembled)
Preassembled kit comes with BL motor and 18A ESC.
Equipped with CNC Universal Battery Plate provides more options to the C.G. adjustment and the installing of electronic gears.
New CNC Alu Tail Gear Case and Double Joints Tail Slider produce precision and the best tail control.
New CNC Tail Pitch Link Set with 4 Bearings which is limited edition for H200SE and H200FES version.
New Auto-rotation Main Gear Set with One Way Bearing (Belt driven).
New CNC Rigid Mixing Arms provide the high strength and rigidity to withstand crash.
New CNC Rotor Head and Stop Plate.
New CNC Mast Mount.
New CNC Integrated Tail Boom Clamp and Middle Mount.
New CNC Motor Mount comes with 2 motor mounts (Front or Rear).
New CF (1mm) mainframe set which is suitable for sub-micro and micro servo (Such as the size of HS-45HB or HS-65MG servo).
New CF Fin and Tail.
New light-weight fiber glass painted canopy.
High Performance Stabilizer Blades and Tail Rotor Blades.
Kit comes with additional longer flybar produces quick response to 3D maneuver.
High Rigidity Landing Gear Brace.
The swash plate and the rotor head system equipped with all Precision CNC titanium anodized aluminum.
Fully equipped ball bearings.(33~37 pieces of micro bearings)
Seesaw head with bell-hiller system.
CCPM collective pitch mechanism (variable pitch).
Specification:

Overall length: 415mm (including cabin & canopy)
Main rotor diameter: 428mm
Tail rotor diameter: 100mm
Motor: KV4800 brushless motor (included)
ESC : 18A ESC (included)
Flying weight: 260g ~ 280g (It may vary according to size of a battery pack and R/C gears.)
Main rotor blades: 200mm SP Blades(included) or Wooden(option)
Flying duration: 5~6 minutes with 7.4v/800mah Li-Po battery
Items needed for assembly:

6 (or more) channel heli-capable transmitter (with CCPM function)
3 Sub-micro or Micro servos for CCPM(Such as BMS 306BB or HS-45HB or HS60HB servo)
1 Micro Digital servo for tail control.
6 (or more) channel micro receiver
Gyro ( GU -210 heading hold gyro or higher level are recommended)
Battery : Li-Po battery (7.4v~11.1v/800mah/15C or more)
Charger: Li-Po battery charger

Superb 3D footage of the Gaui 200 SE V2 in action

FOR FLYBARLESS USERS WE HAVE THE GAUI GU 365 STABILISER AVAILABLE.

Special Offer Gaui 200 SE V2 with additional items to get flying for less, just add radio & battery and your away!!

Add the Tornado 11.1 800Mah battery when ordering and your almost complete

The only and the best 3D capable micro helicopter reduces the 3D flying cost (Even 7.4V/2S1P/LiPo battery can provide the most powerful maneuver than other helicopters which use 11.1V/3S1P/LiPo battery in this class).
Only a short time needed for completion. (95% factory assembled)
Preassembled kit comes with BL motor and 18A ESC.
Equipped with CNC Universal Battery Plate provides more options to the C.G. adjustment and the installing of electronic gears.
New CNC Alu Tail Gear Case and Double Joints Tail Slider produce precision and the best tail control.
New CNC Tail Pitch Link Set with 4 Bearings which is limited edition for H200SE and H200FES version.
New Auto-rotation Main Gear Set with One Way Bearing (Belt driven).
New CNC Rigid Mixing Arms provide the high strength and rigidity to withstand crash.
New CNC Rotor Head and Stop Plate.
New CNC Mast Mount.
New CNC Integrated Tail Boom Clamp and Middle Mount.
New CNC Motor Mount comes with 2 motor mounts (Front or Rear).
New CF (1mm) mainframe set which is suitable for sub-micro and micro servo (Such as the size of HS-45HB or HS-65MG servo).
New CF Fin and Tail.
New light-weight fiber glass painted canopy.
High Performance Stabilizer Blades and Tail Rotor Blades.
Kit comes with additional longer flybar produces quick response to 3D maneuver.
High Rigidity Landing Gear Brace.
The swash plate and the rotor head system equipped with all Precision CNC titanium anodized aluminum.
Fully equipped ball bearings.(33~37 pieces of micro bearings)
Seesaw head with bell-hiller system.
CCPM collective pitch mechanism (variable pitch).
Specification:

Overall length: 415mm (including cabin & canopy)
Main rotor diameter: 428mm
Tail rotor diameter: 100mm
Motor: KV4800 brushless motor (included)
ESC : 18A ESC (included)
Flying weight: 260g ~ 280g (It may vary according to size of a battery pack and R/C gears.)
Main rotor blades: 200mm SP Blades(included) or Wooden(option)
Flying duration: 5~6 minutes with 7.4v/800mah Li-Po battery
Items needed for assembly:

6 (or more) channel heli-capable transmitter (with CCPM function)
3 Sub-micro or Micro servos for CCPM(Such as BMS 306BB or HS-45HB or HS60HB servo)
1 Micro Digital servo for tail control.
6 (or more) channel micro receiver
Gyro ( GU -210 heading hold gyro or higher level are recommended)
Battery : Li-Po battery (7.4v~11.1v/800mah/15C or more)
Charger: Li-Po battery charger

Superb 3D footage of the Gaui 200 SE V2 in action

FOR FLYBARLESS USERS WE HAVE THE GAUI GU 365 STABILISER AVAILABLE.

Includes new brushless motor 5600KV

#Probably the best 3D capable micro helicopter reduces the 3D flying cost (Even 7.4V/2S1P/LiPo battery can provide the most powerful maneuver than other helicopters which use 11.1V/3S1P/LiPo battery in this class).
# Only a short time needed for completion. (95% factory assembled)
# Preassembled kit comes with BL motor and 18A ESC.
# Equipped with CNC Universal Battery Plate provides more options to the C.G. adjustment and the installation of electronics.
# New CNC Alu Tail Gear Case and Double Joints Tail Slider produce precision and the best tail control.
# New CNC Tail Pitch Link Set with 4 Bearings which is limited edition for H200SE and H200FES version.
# New Auto-rotation Main Gear Set with One Way Bearing (Belt driven).
# New CNC Rigid Mixing Arms provide the high strength and rigidity to withstand crash.
# New CNC Rotor Head and Stop Plate.
# New CNC Mast Mount.
# New CNC Integrated Tail Boom Clamp and Middle Mount.
# New CNC Motor Mount comes with 2 motor mounts (Front or Rear).
# New CF (1mm) mainframe set which is suitable for sub-micro and micro servo (Such as the size of HS-45HB or HS-65MG servo).
# New CF Fin and Tail.
# New light-weight fiber glass painted canopy.
# High Performance Stabilizer Blades and Tail Rotor Blades.
# Kit comes with additional longer flybar produces quick response to 3D maneuver.
# High Rigidity Landing Gear Brace.
# The swash plate and the rotor head system equipped with all Precision CNC titanium anodized aluminum.
# Fully equipped ball bearings.(33~37 pieces of micro bearings)
# Seesaw head with bell-hiller system.
# CCPM collective pitch mechanism (variable pitch).

Specification:

Overall length: 415mm (including cabin & canopy)
Main rotor diameter: 428mm
Tail rotor diameter: 100mm
Motor: KV4800 brushless motor (included)
ESC : 18A ESC (included)
Flying weight: 260g ~ 280g (It may vary according to size of a battery pack and R/C gear.)
Main rotor blades: SP Blades(included) or Wooden(option)
Flying duration: 5~6 minutes with 7.4v/800mah Li-Po battery

Items needed for assembly:

6 (or more) channel heli-capable transmitter (with CCPM function)
4 Micro servos (BMS 306BB servo is recommended or HS-45HB or HS-65MG servo)
6 (or more) channel micro receiver
Micro gyro ( GY-401 or heading hold gyros with higher level are recommended)
Battery : Li-Po battery (7.4v~11.1v/550~800mah)
Charger: Li-Po battery charger

See a copy in PDF format of the Parts Manual click here

FREE download Magazine Helista Page 5 tips on building the Gaui 200
Helista Magazine Download link
Make sure you subscribe for future issues e-mailed right to your box !!

Great Tip for the vibration we all get on the rudder control wire. Rudder tip full size click this link