 If you have like all of us spent £££ on crash repairs this device starts to make sense for getting basic Helicraft & Aerobatics out of the way and progressing on to full 3D
Run Ryder Forum Gyrobot Users
GyroBot is the only system using three acceleration sensores added to the 3 MEMS gyro sensors of highest quality. So it can recognize much more movements during flight and process them very fast. That means for you: Perfect flight characteristics without adusting very long.
Flying like on rails without adjusting very long.
The GyroBot 900 is a very high quality and precise controller and stabilizer for the swashplate and tail rotor of a model helicopter (three axes). It allows you to fly each helicopter with a 'rigid' head version, you no longer need a flybar and a tail gyro (But you can use a Flybar in Beginner- and Beginner Acro Mode)! All electronics are contained in one small housing (32x32x16 mm). You have more power and flying time.
The System can be used in the following modes:
1. Standard Mode
This Mode is a very precise control for flybarless helicopters. The model flies like a flybar helicopter, but without the disadvantages of a flybar rotorhead. That means there are absolutely neutral flying characteristics for beginners, perfect FAI, extreme 3D or very stable and precise Scale flying for 2 and multi blade rotorheads. Each multi blade head or 2 blade head flies “like on rails” with very easy adjusting and programming.
2. Beginner Mode
In this mode there is an active tilt control for the aileron and elevator axis. That means if you loose the aileron or elevator stick the GyroBot 900 moves the model back to the horizontal position. The maximum tilt angle of the model can be adjusted from 10 to 50 degrees, so the model does not tilt more than this angle. So a very easy learning of hovering and flying of model helicopters is possible now. The Beginnermode can be overridden from you (adjustable), so you can habituate step by step to the flying of a “normal” helicopter. The Beginnermode works in helicopters with and without flybar.
3. Beginner Acro Mode
This mode offers added to the features of the Beginnermode the possibility of easy learning rolls, flips, loops and inverted flying. If you tilt the helicopter more than 90 degrees, the GyroBot 900 moves it to a stable inverted hovering position, never mind how long you keep the stick in this position. In the inverted position there is also an active tilt control if you loose the aileron or elevator stick. Also the Beginner Acro Mode works in helicopters with and without flybar. The GyroBot is the only system using three acceleration sensores added to the 3 MEMS gyro sensors of highest quality. So it can recognize much more movementsduring flight and process them very fast. That means for you: Perfect flight characteristics without adusting very long. The GyroBot can also be adjusted from absolute beginners very easily. You can do this via the “Cockpit” programming box or via the USB Interface Cable and the PC.The “Cockpit” can be both connected only for programming or fixed in the model.
Technical details:
-CNC manufactured aluminum case; bright chrome finish
-Measurements: 32x32x16 mm,
-Weight: 20 g
-Sensor Elements: 3 MEMS gyro sensors of highest quality, added 3 acceleration sensors ,
-RISC processor, Voltage range: 3,0V – 12 V,
-For all motors (electric, turbine, IC, gas) and all helicopter sizes.
-Optimized Functions for Multi blade Rotorheads
-Swashplate Rotation, Pirouette Optimization
-The system will always be updateable without loosing your existing settings.
-You can switch between 3 different flight settings via a switch on the transmitter.
-Very easy programming, so you find the first setting in less minutes.
-Compatible to all PPM, PCM, and 2,4 GHz RC Systems
-Made in Germany
PLEASE CALL ABOUT SHIPPING COSTS AS WE WILL OFTEN REDUCE SHIPPING OR REFUND YOU AFTER ORDER FOR EXCESSIVE POSTAL CHARGES. OUR WEB SITE POSTAL COSTS IS BASED ON VALUE OF ORDER. WE WILL ALWAYS GIVE YOU A FAIR POSTAL PRICE FOR GOODS. Image of Gyrobot 900 Box click here
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gyrobot Installed check how small the device is in stock.
OUT OF STOCK
|
|
|
|
|
|
You need this interface cable for programming the GyroBot 700 and 900 via PC or Laptop and for updating the software, if new versions are available.
It is not only a cable but a complete USB interface.
|
|
This ist the easiest way to program the GyroBot 900 or 700. The high quality "Cockpit" comes with a blue lighted fully graphical display in a cnc milled aluminum case with bright chrome finish.
You can connect it only for programming or you can leave it in your model (good for large scale models where the GyroBot 900 ist mounted inside the model).
The connection between the GyroBot 900 or 700 and the Cockpit is a normal servo extension cable (included).
The programming is done with only one button and the rudder control stick of the transmitter, it cannot be more simple!
Made in Germany.
Larger Image showing screen programming click here
|
|
This bundle includes:
GyroBot 900 (No. 5000)
USB Interface Cable (No. 5000/1)
|
|
|
|
 GyroBot is the only system using three acceleration sensores added to the 3 MEMS gyro sensors of highest quality. So it can recognize much more movements during flight and process them very fast. That means for you: Perfect flight characteristics without adusting very long.
Flying like on rails without adjusting very long.
The GyroBot 700 is a very high quality and precise controller and stabilizer for the swashplate and tail rotor of a model helicopter (three axes). It allows you to fly each
helicopter with a 'rigid' head version, you no longer need a flybar and a tail gyro. You have more power and flying time.
All electronics are contained in one small housing (33x33x17 mm).
The System offers a very precise control for flybarless helicopters. The model flies like a flybar helicopter, but without the disadvantages of a flybar rotorhead. That means
there are absolutely neutral flying characteristics for beginners (but no Beginnermode), perfect FAI and extreme 3D. So each model flies “like on rails” with very easy
adjusting and programming. For large Scale models with multi blade rotorheads and also for using a very good safety feature for Beginners (Beginnermodes) we
recommend our Gyrobot 900.
The GyroBot is the only system using three acceleration sensores added to the 3 MEMS gyro sensors of highest quality. So it can recognize much more movements
during flight and process them very fast. That means for you: Perfect flight characteristics without adusting very long. The GyroBot can also be adjusted by absolute
beginners very easily. You can do this via the “Cockpit Sport” programming box or via the USB Interface Cable and the PC.
The “Cockpit Sport” can be both connected only for programming or fixed in the model.
Technical details:
-Plastic case
-Measurements: 32x32x17 mm,
-Weight: 14 g
-Sensor Elements: 3 MEMS gyro sensors of highest quality, added 3 acceleration sensors ,
-RISC processor,
-Voltage range: 3,0 V – 12 V, -
For all motors (electric, turbine, IC, gas) and all helicopter sizes.
-The system will always be updateable without loosing your existing settings.
-You can switch between 2 different flight settings via a switch on the transmitter.
-Very easy programming, so you find the first setting in less minutes
-Compatible to all PPM, PCM and 2,4 Ghz RC Systems
-Made in Germany
Heli Freak Review of Gyrobot 700 Click here to read
|
|
|
|
With the "Cockpit Sport" you can program the GyroBot 900 and GyroBot 700.
The difference between "Cockpit Sport" and "Cockpit" ist in the material of the housing (Cockpit: CNC milled Aluminum with bright chrome finish. Cockpit Sport: Plastic) and the display (Cockpit: blue lighted Display. Cockpit Sport: Display without light)
Large Image of sport box
|
|
Gyrobot 700 with USB Interface Cable
SPECIAL DEAL
|
|
Deal 2 - Gyrobot 700 with Cockpit Sport Programmer Part Number 5001/4
SPECIAL DEAL
|
|
.jpg "Sport 5000 25C 3S 11.1v")
