Up Graded Carbon Fibre Main Blades fits 450 helis and Walkera 60
These Carbon Fiber Main Rotor Blades are made of very high quality. It is symmetrical high gloss finish and very durable. It is one of the most durable products on a helicopter. Its mounting holes are identical to the stock blades, thus allowing for easy installation.. Real carbon fiber product!
These composite blades are considered by many flyers as the best micro rotor blades money can buy. These ultra light blades are super smooth cutting through the air very smoothly The blades produce absolutely magnificent flying characteristics from superb stability to breath taking 3D performance.
The blade roots use brass inserts for longer durability of the blades.
Great for microhelicopters.
Walkera 60
3dx 450
superhero 450
T Rex 450
4.5 mm root thickness to blade grips
find out more
TFM-600-4 blades rotor head for 600 Size Helicopters
This premium multi-blade rotor head is perfect for the scale helicopter. Its advanced plug-n-play design requires no swash-plate (follower) or special timing adjustments. Make your scale heli look great and fly without additional electronic stabilization.
Assembly required.
For our :Apache & BO-105 .
Other :Funkey Agusta a 109 ,Blackhawk ,Hughes 500 .
Use 500 head manual for assembly the only diff is screw location of the feathering spindles
find out more
T-Rex 3DX450 CNC Pulley Set [UGT-G02]
![T-Rex 3DX450 CNC Pulley Set [UGT-G02]](ugt-g02.jpg)
Description
CNC Pulley Set
T-Rex 450 Series
3DX-450se
find out more
Air Wolf cnc suspension landing gear
Model: Air Wolf cnc suspension landing gear
Description: This is special design from our Air Wolf 500 fuselage .Especially absorb force of gravity suspension string design .The landing gear from our precise CNC machine .it can easy install and use a micro servo control linkage and safty locked system .All cnc aluminium control arm are included .It can replace to Align ,Heliartist ,Century-rc .(Wheels not included)
find out more
T Rex 450 Main Blade Grips Radial Bearings 4 x set for SX 450 head assembly
SX 450 Main Blade Grips Radial Bearings 4 x set for SX 450 head assembly
For 4mm feathering spindle size.
sizes
2 x 4x7x2.5mm
2 x 4x8x4mm
find out more
Flybarless 2 x 4mm alloy washers for 4mm feather spindle
Flybarless 2 x 4mm alloy washers for 4mm feather spindle
find out more
T Rex 450 SE V2 Spares - Black Hard Dampers
T Rex 450 SE V2 Spares - Black Hard Dampers
find out more
T Rex 250 Silver Carbon Frame Set NEW Sonix Product LOWER PRICED
Complete Silver Carbon Frame set as shown here in the image for the T Rex 250 Helicopter
Quality cut Silver carbon Fibre package.
IN STOCK NOW from Sonix
If you bought all the items seperate from other T rex 250 Align dealers the whole lot would cost £29.00 !!
Click for a larger view of the deal
find out more
4 Blade CNC Rotor Head For 500 size
This is a multi blades rotor head special for the scale helicopter It design no swash-plate lock (follower) require .The total hight of the centre hub only 35mm ,It make your model great scale look and C/G lower for sport preformance .
Fits 500 size Helicopters for that great Scale look
Try pairing with the Gyrobot 700 Stabiliser
find out more
T Rex Sticky Gyro Gel
Instructions:
?PU adhesive gel is a material that possess excellent vibration dampening characteristics, ideal for mounting gyroscopes, receivers, or other electronics in vibration prone areas. The gel can be re-used by cleaning off containment (such as dust) with water. Mild detergent can also be used to wash away oily residues. Once dried the gel will regain its adhesiveness. The PU adhesive gel is an ideal replacement for traditional gyro foam tape. Its excellent vibration dampening characteristic can minimize impact induced damages on electronics.
Specification:
?Material:PU
?Size:110x55x3mm
Accessories:
?PU adhesive gel x 1
?Hook & loop fastening tape x 2
PU Adhesive Gel
K10457A
find out more
Stainless Steel Puller Set for Motor Pinions
Stainless gear puller -- for motor pinion/gear Removing
It is ok for motor shaft diameter 0.9-3.5mm
Back in stock now 11-03-10
find out more
Model: Air wolf 450 CNC landing gear set
Model: Air wolf 450 CNC landing gear set
Description: This is our CNC aluminium 7075 landing gear for 450 Airwolf ,It is converted to our air wolf 450 and also for Align and discontinue dealer Heli-artist version .
find out more
Apache AH-64
The Apache AH-64A is the world first 600 size scale attack helicopter .It design by computer and precision cnc machine .Cnc machine provid detail panel line and precision scale .The kit included the base weapon set and cnc matel suspension front and rear scale landing gear ,The kit included special metal side main frame for Align 600 , Bullet -600 or any clone 600 .Also suitable for Logo-400/10 ,Swift-16 .The detail front sensor ,dummy machine gun are included .Factory painted military green colour .Two piece fuselage are easy and lower cost for shipping .
TFM-600-4 blades rotor head are perfect match for this model .
Length:1450 mm
width:360 mm
High:500 mm
28-02-10 in stock now
find out more
Gaui Hurricane 550 EP Helicopter Combo 90% ARTF Basic Combo + Motor + ESC !!
The 30-size powerful EP helicopter from the creator of SHOGUN helicopters. Use 2 batteries from T-REX 450. Real winner!
Now, from the makers of the Zoom, Shogun and various other successful models, comes something much bigger – the Hurricane EP 550 electric helicopter. With an overall length of just over 1m, a main rotor diameter of 1110 mm and fitted with 50cm blades the Hurricane is just a little smaller than a 30-sized helicopter and suitable for beginners and intermediate pilots alike. One small point for anyone new to the sport is that this helicopter uses eCCPM (Electronic Cyclic and Collective Pitch Mixing) so a suitable transmitter will be required although most have this facility these days. The model comes under the category of ARTF (almost ready to fly) although ‘partially assembled’ might be more accurate since installing the radio gear on any model takes a good few hours.
Features:
The Lightest-weight medium-sized EP helicopter.
Flying weight 1950g.
The best power to weight ratio gives excellent 3D capability .
Lowest price for battery cost in its class. Use 2 of 3S batteries in series.
Multi-stage gear reduction system delivers high power and results in a streamline cabin and canopy.
Push-pull linkages on ECCPM system limits any play for sharp control response.
Plastic and fiberglass composite main frame made from Dupont aviation engineering plastic for light weight and outstanding durability
Precision CNC anodized aluminum swash plate.
Fully equipped ball bearings ( total 43 bearings)
New Seesaw head design with Bell-Hiller system.
CNC aluminum center hub
CNC aluminum swashplate
90% factory assembly.
Belt driven tail rotor.
Specification:
Specifications:
• Overall length: 1060mm (including cabin & canopy)
• Main rotor diameter: 1110mm
• Main blade length: 475~550mm
• Tail rotor diameter: 222mm
• Flybar paddle: 84*45*6mm
• Tail blade length: 80mm
• Overall height: 305 mm
• Overall width: 85 mm
• Motor: KV800 external brushless motor (included)
• ESC: 50A/25V (ESC included)
• Flying weight: 1950g (May vary depending on battery pack and RC gear)
• Main rotor blades: wooden 500mm(included) or fibre(option)
Items required for assembly:
• 6 (or more) channel heli-capable transmitter (with CCPM function)
• 4 servos (digital servo is recommended)
• 6 (or more) channel receiver
• Gyro (heading hold gyro is recommended) GY 401 we sell ideal !! and great price
• Battery : 2 packs of Li-Po batteries (11.1v/2200mah )
• Charger: Li-Po battery charger Imax B6 ideal choice
find out more
METAL CASE G401B Version NEW Product
Same Features as Plastic Case G401B but with metal case for added crash protection.
Comes with instructions
find out more
Helivol Tool set (boxed)
Selection of tools in attractive and practical tool box. Branded under the Helivol logo.
Product Specification:
Includes:
Pitch Gauge
Wire Cutters
Pliers
Ball Link Pliers
4.0mm Socket Driver
5.5mm Socket Driver
1.5mm Hex Driver x 2
2.0mm Hex Driver
2.5mm Hex Driver
Phillips Driver x 2
Flat Head Driver
find out more
Tel 0843 289 9681
Sportsmoto Ltd Company Number 6709642 Ltd in United Kingdom
