Logic RC 12 Volt Battery Chargers

he Emperor L702B Pro is the ultimate choice for the professional modeller. With twin 300 watt chargers, the Emperor can charge two separate packs at up to 20 Amps per output!

Key Features:
Easy to use user interface
11~28V DC Input
2 x 0.1~20A Charging (max 300W per channel)
2 x 0.1~10A Discharging (max 50W per channel)
2 x 1~7 Cell Lithium - Charge, Discharge and Storage
2 x 1~18 Cell NiCd/NiMh - Charge, Discharge and Cycle
2 x 2~24V Lead Acid - Charge and Discharge
NiCd/NiMh - Automatic, Normal, Linear and Reflex Charge
NiCd/NiMh - Adjustable Trickle Charge
NiCd/NiMh - Adjustable Peak Sensitivity
Lithium - Selectable Charge Rate Limit (up to 5C)
Lithium - TCS (Terminal Capacity Selection)
Lithium - Adjustable maximum cell voltage
Safety Timer Cut-off
Maximum Capacity Cut-off
2 x Temperature Sensor Input (sensor optional)
2 x 20 Battery Memories
128 x 64 Pixel Blue Backlit LCD
2 x 4mm Output Sockets
2 x 7 Cell JST-EH Balance Port with 7 Cell adaptor boards for JST-XH and FP/TP
10 Melodies (selectable for each channel)
USB port for Firmware Upgrades
When combined with the O-FS-PS600ADJ 600W Adjustable Power Supply, the Emperor can also be powered from the mains.

Features
The LCD readout shows the charge progress in voltage, current, capacity and time
Short circuit Protection
Automatic safety cut-off after 90 minutes
Reverse Polarity Protection on both Input and Output
Size: 145 w x 135 L x 55 H (mm)
Weight: 450g (without leads)
Tamiya type charge lead included

Specifications
Input Voltage: 110~240V Mains 11~15V DC
Battery Type & Cells: 4~8 NiCd/NiMH (4.8V~9.6V)
Charge Rate (Fast): 0.8A, 1.5A, 3A & 5A User Selectable (Max 40W)
Charge Rate (Trickle): Automatic
Charge Termination: Delta Peak NiCd 8mV/cell NiMh 5mV/cell

O-FS-L50BP
Fusion L50B Pro Typhoon DC
£44.99 RRP

Features

•2 - line, 16 character, blue backlit, LCD makes the screen extremely clear and legible
•Built-in intelligent balancing circuit is designed to individually balance each cell on the connected lithium battery pack within the tolerance of 5mV during charge or discharge
•Balancing plug adaptor boards are supplied to suit JST XH, FlightPower and Thunder Power batteries. Optional adaptors for Polyquest are available
•Voltage monitoring feature shows each actual cell voltage on the screen during balancing
•Various warning messages for incorrect input voltage, wrong connections, unsuitable battery condition and reverse polarity on output

Specifications
•Input Voltage: 11~15V DC
•Battery Type & Cells: 1~5 Li-Po, Li-Ion, Li-Fe / 1~14 NiCd, NiMH / 1~6 Lead Acid cells
•Battery Capacity 100mAh ~ 6000mAh adjustable ONLY for Li-Po, Li-Ion, Li-Fe
•Charge Rate: 0.1A ~ 6A Adjustable in 100mA steps (max 50W)
•Trickle Charge Rate: 0 ~ 200mA
•Balancing Max. Current: 280mA (Tolerance 5mV during charge)
•Charge Termination 'Zero Delta V' peak detection for NiCd/NiMH 'Constant current/constant voltage' for Li-Ion/Po Li-Fe and Pb
•Delta Peak Sensitivity: 5mV ~ 25mV for NiCd & 3mV ~ 25mV for NiMH (per cell)

This charger was reviewed in October 2008 by RC Model World. Please click here to read the review.
More detailed image click

Fusion L120Pro Paladin DC
£99.99 RRP

The Fusion Paladin L120Pro charger is the flagship of the Fusion charger range, with 10A (max 180W) charging power for up to 12 Lithium cells. The Package also includes the Fusion 12 cell balancer (O-FS-B12S) with balance adaptor boards for XH & TP type batteries.

Features

•Automatic settings for charging and discharging NiCd/NiMH packs
•10 user definable intellligent battery memories that enable individual pack parameters to be stored, i.e. battery type, number of cells, battery capacity, charge current and discharge current
•Pack cycling (charge to discharge / discharge to charge) Cycling repeat 1~5 times with 1~30min delay between cycles (NiCd/NiMH)
•2-line, 16 character, blue backlit, LCD makes the screen extremely clear and legible
•Various warning messages for incorrect input voltage, wrong connections, unsuitable battery condition and reverse polarity on output
•Automatic initial charge stage checks the condition of the battery being charged

Specifications

•Input Voltage: 10~15V DC
•Battery Type & Cells: 1~12 Li-Po, Li-Ion, Li-Fe / 1~30 NiCd, NiMH / 1~6 Lead-Acid
•Battery Capacity: 100mAh ~ 20,000mAh adjustable ONLY for Li-Po, Li-Ion, Li-Fe
•Charge Rate: 0.1A ~ 10A Adjustable in 100mA steps (Max 180W)
•Discharge Rate: 0.1A ~ 10A in 100mA steps (auto limited to 80W max)
•Trickle Charge Rate: 0 ~ 500mA & Automatic Balancing Interface compatible with Fusion 6 & 12 cell balancers
•Charge Termination: 'Zero Delta V' peak detection for NiCd/NiMH 'Constant current/constand voltage' for Li-Ion/Li-Po/Li-Fe & Pb
•Delta Peak Sensitivity: 5mV ~ 20mV (per cell)

This charger was reviewed in May 2009 by RC Model World. Pleaseclick here to read the review.
Larger exploded image of product click