|
 |
|
|
This is a multi blades rotor head special for the scale helicopter It design no swash-plate lock (follower) require .The total hight of the centre hub only 35mm ,It make your model great scale look and C/G lower for sport preformance .
Fits 500 size Helicopters for that great Scale look
Try pairing with the Gyrobot 700 Stabiliser
Assembly Manual Link Click
More...Large Image Click
|
|
1 x BA5 Budget Single Thrust Ball Bearing 5x12x4mm
|
|
1 x BEARING FOR BLADE GRIP 6MM X 12 MM X4 MM
|
|
CENTRE HUB WITH JESUS BOLTS
|
|
1 X 4 Blade Head 500 BLADE GRIP COMPLETE WITH BEARINGS
|
|
1 X 4 Blade Head 500 HEAD BUTTON WITH BOLT
|
|
1 X 4 Blade Head 500 BLADE GRIP ARM TO SWASHPLATE COMPLETE
|
|
1 X 4 Blade Head 500 BOLT ASSEMBLY FOR BLADE GRIP
|
|
1 X 4 Blade Head 500 - WASHER FOR BLADE GRIP BEARING ASSEMBLY
|
|
 Introduction:
This is the newest generation 450 size 4 blades scale rotor head made of HeliArtist.
One of the most important specification is it has damper function for each
main blade holders. This is different from transdition scale rotor heads. During the
flight, when there is a strong or sudden wind then the dampers will
keep the heli in more stable condition. Moreover, the strength of the dampers can
also be adjusted by the screws.
This rotor head will be pre-assembled before shipping.
Designed to Fit most of the 450 size helis(use 5mm main shaft) such as T-Rex 450SE/SEV2/Sport/Pro etc.
Specification:
- weight ~ 129g
Included :
- 120 degree CCPM swashplate x1
- CNC Metal main blade grip x4
- CNC Rotor Hub with damper function design x1
- CNC Washout Base x1
- CNC Arm Set x1
- Ball links x4
- Stopper x1
Details of Testing flight for reference :
Transmitter : JR DSX7
Receiver : JR RD731
Motor : Align 450M
Speed control: Align 35A ESC
Battery : APLUS 2200mAh-35C 3S1P
Main Servos : Maxwell
Gyro : GP750
Tail servo : Fubata DS9650 Digital Servo
SWASH MIX :
ALE 16%
ELE 16%
PIT 30%
Pitch :
0% --> -2 degree
50% --> +4 degree
100% --> +9 degree
Throttle :
0% , 35% , 60% , 83% , 100%
Gyro sens :
80%
Alternative View Click
|
|
|
|
|
|
This tri-blade rotorhead is designed for helicopters, its main shaft diameter is 10mm.
Materials: Aluminum 7075 and stanless steel
Status: Pre-assembled and ready to be intalled
Included:
3 pcs CNC Blades Grip
CNC Rotor Hub
CNC Swashplate
CNC Arm Set
CNC Washout Base
Ball links
|
|
This four -blade rotorhead is designed for helicopters, its main shaft diameter is 10mm.
Materials: Aluminum 7075 and stanless steel
Status: Pre-assembled and ready to be intalled
Included:
4 pcs CNC Blades Grip
CNC Rotor Hub
CNC Swashplate
CNC Arm Set
CNC Washout Base
Ball links
|
|
Sportsmoto -Head 5 blade Hub
10mm shaft head
|
|
Sportsmoto -Head 4 blade Hub
(same photo used for each type)
10mm shaft head
|
|
Sportsmoto -Head 3 blade Hub
(same photo used for each type)
10mm shaft head
|
|
Sportsmoto Head -Feathering Spindle x 1 600 size head
|
|
Sportsmoto Head - Blade Grip Universal 3,4,5 head 10mm shaft type
|
|
Sportsmoto Head - Bearing set - 10mm shaft type
1 x set of bearings as shown in photo
|
|
Sportsmoto Head - Radial Bearing set - 10mm shaft type
1 x set of bearings as shown in photo
|
|
Sportsmoto Head - Thrust Bearing set - 10mm shaft type
1 x set of bearings as shown in photo
|
|
Sportsmoto Head - 1 x spacer washer - 10mm shaft type
|
|
Sportsmoto Head - Head button 10mm shaft type head
|
|
Sportsmoto Head - Anti Rotation Device 10 mm Shaft type
|
|
Sportsmoto Head -10mm shaft size Swashplate 3 blade head
|
|
Sportsmoto Head -10mm shaft size Swashplate 4 blade head
|
|
Sportsmoto Head -10mm shaft size Swashplate 5 blade head
|
|
Sportsmoto Head 3 x Connecting Rods & links -10mm version
|
|
Sportsmoto Head 4 x Connecting Rods & links -10mm version
|
|
Sportsmoto Head 5 x Connecting Rods & links -10mm version
|
|
This tri-blade rotorhead is designed for helicopters,its main shaft diameter is 8mm.
You get 2 x sets of blade grips with this combo 9 and 10 mm you can exchange to suit your blades.
Our scale 500 blades fit perfect
Materials: Aluminum 7075 and stanless steel
Status: Pre-assembled and ready to be intalled
Included:
1.3pcs CNC Blades Grip
2.CNC Rotor Hub
3.CNC Swashplate
4.CNC Arm Set
5.CNC Washout Base
6.Ball links
pdf manual of head 3 bld click to download the PDF Larger Image of kit
|
|
This quad-blade rotorhead is designed for helicopters its main shaft diameter is 8mm.
You get 2 x sets of blade grips with this combo 9 and 10 mm you can exchange to suit your blades.
Our scale 500 blades fit perfect
Materials: Aluminum 7075 and stanless steel
Status: Pre-assembled and ready to be intalled
Included:
1.4pcs CNC Blades Grip
2.CNC Rotor Hub
3.CNC Swashplate
4.CNC Arm Set
5.CNC Washout Base
6.Ball links
4 x Blade Head PDF of construction click here to download Larger Image of deal click
|
|
This pentad-blade rotorhead is designed for helicopters, its main shaft diameter is 8mm.
You get 2 x sets of blade grips with this combo 9 and 10 mm you can exchange to suit your blades.
Our scale 500 blades fit perfect
Materials: Aluminum 7075 and stanless steel
Status: Pre-assembled and ready to be intalled
Included:
1.5pcs CNC Blades Grip
2.CNC Rotor Hub
3.CNC Swashplate
4.CNC Arm Set
5.CNC Washout Base
6.Ball links
Click to download the 5 blade head assembly drawing
Our CAD drawing before production click to see
|
|
Designed to Fit
T-rex 450SEV2,
T-rex 450SPORT,
T-rex 450PRO
450 Size............
Shaft Dimension : 5mm
including 120 CCPM swashplate / 5PCS Metal main blade grip / CNC Rotor Hub / CNC Washout Base / CNC Arm Set / Main Shaft
Pre-assembled and ready to be installed
Included :
1. CNC Rotor Hub
2. CNC Blades Grip x 5
3. CNC Washout Base
4. CNC Arm Set
5. CNC Swashplate
6. Main Shaft
7. Ball links
DUE IN STOCK AROUND 22-06-10
|
|
Designed to Fit
T-rex 450SEV2,
T-rex 450SPORT,
T-rex 450PRO
450 Size............
Shaft Dimension : 5mm
including 120 CCPM swashplate / 4PCS Metal main blade grip / CNC Rotor Hub / CNC Washout Base / CNC Arm Set / Main Shaft
Pre-assembled and ready to be installed
Included :
1. CNC Rotor Hub
2. CNC Blades Grip x 4
3. CNC Washout Base
4. CNC Arm Set
5. CNC Swashplate
6. Main Shaft
7. Ball links
Limited qty in stock 15-06-10
|
|
Months Model Helicopter World Magazine in stock.
OUT OF STOCK
This months issue shortly to be reviewed read more click image Larger -Image to read click
|
|
|
|
Multi Blade 450 Size Helicopter head system
Fits most common 450 size helicopters and 5mm mainshaft
Comes with picture assembly manual from ourselves
IN STOCK Large Image click here
|
|
Multi Blade 450 Size Helicopter head system
Fits most common 450 size helicopters and 5mm mainshaft
Comes with picture assembly manual from ourselves
IN STOCK
Large Image click here
|
|
DEAO SM -STH5004 Scale 4 blade tail rotor head - only 500 size helicopters
Price: £75.00 / €85.50
SM -STH5004 Scale 4 blade tail rotor head
This premium cnc full 7075 aluminium 4 blades tail rotor head that is perfect for a scale helicopter. Its advanced plug-n-play design requires no extra parts or special timing adjustments.
Makes your scale heli look great and fly well preformance .It is for 500 Align .Bullet -500 or any 4 mm shaft models .The special design for your orginal shaft .
Length : 62 mm (screw centre)
Shaft diameter : 4 mm
weight :44g
|
|
DEAO SM -STH6004 Scale 4 blade tail rotor head - only 600 size helicopters
Price: £75.00 / €85.50
SM -STH6004 Scale 4 blade tail rotor head
This premium cnc full 7075 aluminium 4 blades tail rotor head that is perfect for a scale helicopter. Its advanced plug-n-play design requires no extra parts or special timing adjustments.
Makes your scale heli look great and fly well preformance .It is for 600 Align .Bullet -500 or any 5 mm shaft models .The special design for your orginal shaft .
Length : 62 mm (screw centre)
Shaft diameter : 5 mm
weight :44g
|
|
SM TRH -603 3 Blade Tail Rotor Head for 600 Size Helicopter
his premium CNC full 7075 aluminium 3-blade tail rotor head is perfect for scale helicopters. Its advanced plug-n-play design requires no extra parts or special timing adjustments. It makes your scale heli look great and preform well. It is for Align 600, HobbyKing HK-600 or any 5 mm shaft models. It is specially designed for your orginal shaft.
This rotor head is also perfect for our Alouette -3 and Mi-24 Hind .
The tail rotor blades in the photo are not included . Large Image of 600 3 blade head kit click here
|
|
SCALE TAIL ROTOR BLADES FOR DEAO 500 /600 TAIL ROTOR HEAD
68mm blades
2.83 mm location hole
5mm Root thickness
Great scale blades
|
|
4 Blade Tail Rotor alternative view in stock.
OUT OF STOCK
|
|
This premium multi-blade rotor head is perfect for the scale helicopter. Its advanced plug-n-play design requires no swash-plate (follower) or special timing adjustments. Make your scale heli look great and fly without additional electronic stabilization.
Assembly required.
For our :Apache & BO-105 .
Other :Funkey Agusta a 109 ,Blackhawk ,Hughes 500 .
Use 500 head manual for assembly the only diff is screw location of the feathering spindles
Your Tube Video Head in use in UK Model March 10-review in Model Helicopter World Magazine read it click here
|
|
TFMBH-159 3 Blades rotor head for 600 size
Includes swashplate as show here
Great quality and ideal with 600 scale blades for 600 or larger projects (Blue Thunder) swashplate-image click here
|
|
This premium multi-blade rotor head is perfect for the scale helicopter. Its advanced plug-n-play design requires no swash-plate (follower) or special timing adjustments. The swashplade are included.
Assembly required.
perfect with our scale blades below
|
|
4 x Alloy Washers machined for 600 Blade head 1mm thick each
Better than plastic washers supplied or we can make the washers to the thickness you desire.
|
|
Air Probe for 600 4 blade head
NOT PAINTED
|
|
new design from Smartmodel tail shaft drive and raise tail gear box system . it is suitable for Align 600/700 .Customer possible let test flying the mechanic in pod status .let you sure your setting are suitable in scale flying and no need take risk with your new scale fuselage .We recommend you put this system in your mechanic and test fly well and sure your flybarless system setting well .This system is the best way let your scale fuselage flying safty and test flight with confident .
Kit included :
Included in the kit
Front drive shaft (Long length)
Angle adjustable front gear box set(0-5 degree)
Long main drive shaft (700mm)
Bearing holder
Angle adjustable raise tail gear box(35 degree to 65 degree)
Servo linkage arm
Tail drive shaft (300mm)
The tail gear box mix width( 32mm )
Drilling tools x 1 More Information Images
|
|
|
|
The world first scale narrow injection mold rotor blade for 450 size scale models .It produce by high precision injection mold machine ,Factory balance in high precision scale and quality guarantee .Rotoe blades are made of special flexible plastic with carbon .It special for rigid rotor head and multi blades rotor head .The flexible material provide "crash resistance " specicality. Close up shot fitted to DEAO head
|
|
The TF -SRB-4304 is made of special plastic material .
The special material offer strength and flexible balance for the good flying performance .
High precision injection molding produces same standard and same weight in blades
A well priced quality product.
(Maximum head rpm 2300 or below )
The extreme 3-D flying not recommend )
Please note 1 x blade in this offer
|
|
The TF -SRB-4304 is made of special plastic material .
The special material offer strength and flexible balance for the good flying performance .
High precision injection molding produces same standard and same weight in blades
A well priced quality product.
(Maximum head rpm 2300 or below )
The extreme 3-D flying not recommend )
Please note 3 x blades in this offer for 3 blade head
|
|
The TF -SRB-4304 is made of special plastic material .
The special material offer strength and flexible balance for the good flying performance .
High precision injection molding produces same standard and same weight in blades
A well priced quality product.
(Maximum head rpm 2300 or below )
The extreme 3-D flying not recommend )
Please note 4 x blades in this offer for 4 blade head
|
|
The TF -SRB-4304 is made of special plastic material .
The special material offer strength and flexible balance for the good flying performance .
High precision injection molding produces same standard and same weight in blades
A well priced quality product.
(Maximum head rpm 2300 or below )
The extreme 3-D flying not recommend )
Please note 5 x blades in this offer for 5 blade head
|
|
1 x 600 Scale Blade Sportsmoto
the world first scale narrow injection mold rotor blade for 600 size scale models. It is produced by high precision injection mold machine. It is factory balanced in high precision scale and thus quality is guaranteed. Rotor blades are made of special flexible plastic with carbon. It is specially designed for rigid rotor head and multi- blade rotor head. The flexible plastic material provides special "crash resistance".
length : 600 mm
Width : 44 mm
Blades grip : 12mm
Screw : 4mm (Possible drill 5 mm )
weight : 200-210g/piece
Airfoil : Aerofoil on top part of blade only NOT for 3D
|
|
2 x 600 Scale Blade Sportsmoto (make up your own qty for multi blade heads)
the world first scale narrow injection mold rotor blade for 600 size scale models. It is produced by high precision injection mold machine. It is factory balanced in high precision scale and thus quality is guaranteed. Rotor blades are made of special flexible plastic with carbon. It is specially designed for rigid rotor head and multi- blade rotor head. The flexible plastic material provides special "crash resistance".
length : 600 mm
Width : 44 mm
Blades grip : 12mm
Screw : 4mm (Possible drill 5 mm )
weight : 200-210g/piece
Airfoil : Aerofoil on top part of blade only NOT for 3D
|
|
3 x 600 Scale Blade Sportsmoto
the world first scale narrow injection mold rotor blade for 600 size scale models. It is produced by high precision injection mold machine. It is factory balanced in high precision scale and thus quality is guaranteed. Rotor blades are made of special flexible plastic with carbon. It is specially designed for rigid rotor head and multi- blade rotor head. The flexible plastic material provides special "crash resistance".
length : 600 mm
Width : 44 mm
Blades grip : 12mm
Screw : 4mm (Possible drill 5 mm )
weight : 200-210g/piece
Airfoil : Aerofoil on top part of blade only NOT for 3D
|
|
4 x 600 Scale Blade Sportsmoto
the world first scale narrow injection mold rotor blade for 600 size scale models. It is produced by high precision injection mold machine. It is factory balanced in high precision scale and thus quality is guaranteed. Rotor blades are made of special flexible plastic with carbon. It is specially designed for rigid rotor head and multi- blade rotor head. The flexible plastic material provides special "crash resistance".
length : 600 mm
Width : 44 mm
Blades grip : 12mm
Screw : 4mm (Possible drill 5 mm )
weight : 200-210g/piece
Airfoil : Aerofoil on top part of blade only NOT for 3D
|
|
5 x 600 Scale Blade Sportsmoto
the world first scale narrow injection mold rotor blade for 600 size scale models. It is produced by high precision injection mold machine. It is factory balanced in high precision scale and thus quality is guaranteed. Rotor blades are made of special flexible plastic with carbon. It is specially designed for rigid rotor head and multi- blade rotor head. The flexible plastic material provides special "crash resistance".
length : 600 mm
Width : 44 mm
Blades grip : 12mm
Screw : 4mm (Possible drill 5 mm )
weight : 200-210g/piece
Airfoil : Aerofoil on top part of blade only NOT for 3D
|
|
The world first scale narrow injection mold rotor blade for 600 size scale models. It is produced by using a high precision injection mold machine.
Factory balanced in high precision scale and thus quality is guaranteed.
Rotor blades are made of special flexible plastic with carbon.
It is specially designed for rigid rotor head and multi- blade rotor head. The flexible plastic material provides special "crash resistance".
Length : 700 mm
Width : 44 mm
Blades grip : 12mm
Screw : 4mm (Possible drill 5 mm )
weight : 162-165g/piece
Airfoil : Flat bottom (clockwise)
TFSP-168 Part Number
|
|
The world first scale narrow injection mold rotor blade for 600 size scale models. It is produced by using a high precision injection mold machine.
Factory balanced in high precision scale and thus quality is guaranteed.
Rotor blades are made of special flexible plastic with carbon.
It is specially designed for rigid rotor head and multi- blade rotor head. The flexible plastic material provides special "crash resistance".
Length : 700 mm
Width : 44 mm
Blades grip : 12mm
Screw : 4mm (Possible drill 5 mm )
weight : 162-165g/piece
Airfoil : Flat bottom (clockwise)
TFSP-168 Part Number
|
|
The world first scale narrow injection mold rotor blade for 600 size scale models. It is produced by using a high precision injection mold machine.
Factory balanced in high precision scale and thus quality is guaranteed.
Rotor blades are made of special flexible plastic with carbon.
It is specially designed for rigid rotor head and multi- blade rotor head. The flexible plastic material provides special "crash resistance".
Length : 700 mm
Width : 44 mm
Blades grip : 12mm
Screw : 4mm (Possible drill 5 mm )
weight : 162-165g/piece
Airfoil : Flat bottom (clockwise)
TFSP-168 Part Number
|
|
The world first scale narrow injection mold rotor blade for 600 size scale models. It is produced by using a high precision injection mold machine.
Factory balanced in high precision scale and thus quality is guaranteed.
Rotor blades are made of special flexible plastic with carbon.
It is specially designed for rigid rotor head and multi- blade rotor head. The flexible plastic material provides special "crash resistance".
Length : 700 mm
Width : 44 mm
Blades grip : 12mm
Screw : 4mm (Possible drill 5 mm )
weight : 162-165g/piece
Airfoil : Flat bottom (clockwise)
TFSP-168 Part Number
|
|
The world first scale narrow injection mold rotor blade for 600 size scale models. It is produced by using a high precision injection mold machine.
Factory balanced in high precision scale and thus quality is guaranteed.
Rotor blades are made of special flexible plastic with carbon.
It is specially designed for rigid rotor head and multi- blade rotor head. The flexible plastic material provides special "crash resistance".
Length : 700 mm
Width : 44 mm
Blades grip : 12mm
Screw : 4mm (Possible drill 5 mm )
weight : 162-165g/piece
Airfoil : Flat bottom (clockwise)
TFSP-168 Part Number
|
|
.jpg "Sport 5000 25C 3S 11.1v")
