Outrage G 5 Compatable Spares

3.17mm 13th gear for Outrage G5
Comes with Grub Screw

3.17mm 11T gear for brushless motor
Comes with Grub Screw

R&W 2.3mm 12 T gear for brushless motor
12T NEW Pinions will be available from June 2008 for this 12T size
The product image will shortly be updated to reflect the new pinion design
12T is stamped on the underside of the pinion Larger Image of Pinion

Fits 3.17mm shaft size motors

HP T-Rex 450 Tail Blades
Our Helicopter tail blades are created using a complex combination of
materials which provide the perfect mix of strength and flexibility. The blades have a
very large surface area, yet weigh very little. We currently provide them in three sizes.
The 59.6mm length is our smallest blade which weighs 1.5g. This size fits the Outrage G5 as well as T Rex 450 & 3DX450
Weight is per blade.

Carbon Fibre Tail Blades for Outrage G5 fit perfect

Replace the stock plastic blade grips with these ultra light and stiff Carbon Tail Blades at the lowest price REAL CARBON FIBER tail blades on the market.
Beautiful finish and crispy tail control. Best carbon fiber tail blade on the market. Fit on Shogun, Walkera, 3dx400, and T-REX & Outrage G5 helicopters.

weight each blade 1.4G (total 2.8G)

Outrage G5 Compatable CNC Stabilizer Bracket
Go Blue and allows fitting of G10 or Silver Carbon Horizontal fin!!

Tail Servo Mounts in BLUE CNC alloy for Outrage G5
Stand out go BLUE CNC alloy 12mm tail servo mounts !!
Fits Outrage G5 boom
Comes with all screws Included for fitting

Shorter 12mm Tail Boom for Outrage G5 aprox 30mm shorter than STD Tail Boom.

If your trying the shorter 12mm BLUE Boom you will need the shorter 397T Drive belt option

Tail Pitch Slider for Outrage G5 in CNC Alloy
Comes in BLACK CNC alloy

Tail Case Bell Crank Link assembly in CNC Alloy

Metal Tail case bell crank and lever assembly fits Outrage G5
CNC Black Alloy Bell crank is angled but can easily be changed for existing Outrage G5 bell crank
Includes all bearings

Tail Slide Combo Assembly fits Outrage G5 (actually Mini Titan Upgrade parts)
Does not include tail shaft but all other parts compatable with Outrage G5 Tail assembly

Swashplate for Outrage G5 (actually Mini Titanm Swashplate from Sonix Upgrades)
Great Proven quality product
Comes without Balls Fitted to swashplate 4.75 x 3.5mm or screws
Comes without anti Rotation Pin
Description

1 x CCPM Swash plate

BIG Saving over Outrage G5 swashplate cost

Fits Outrage G5 with 12mm Boom alternative Gearbox to Outrage G5 gearbox
T-Rex 450/Dragonfly 36 Series Pre Assembled Tail Unit (Boom 12mm)
Align T-Rex 450 Series
HDX-450se
3DX-450se
Tomahawk
Dragonfly 35-36

4 x Canopy Grommets for Outrage Helicopter

1 x Main Shaft fits Outrage G5 Helicopter

NEW July 2009 Hardened Ground Steel Main Shaft option.
Tougher than mild steel normal version
1x shaft included in offer Larger Image of Product

Main Shaft Collar 2 x Pack Suits Outrage G5 main shaft

One Way Bearing for Main Roto BO1 for Outrage G5
HFO 612 fits perfect

Thrust Bearings Fit's Outrage G 5 3x8x3.5
2 x pack

UGT-SP Boom struts from 3DX450B fits Outrage G5 Helicopter but these are shorter (moves horizontal find fwd of Outrage std postion by aprox 30mm

2 x in pack with alloy ends

2 x Replacement Main gear pack fits Outrage G5

25 T Tail Drive Gear for Outrage G5
Comes with bearings loose (not fitted ) that suit bearing blocks for outrage G5

2 x Bearings set for tail drive gear blocks.

1 x One way Bearing Hub
1 x One Way bearing Sleeve
1 x Main Gear 150t
1 x Autorotation Tail Drive Gear 106T
1 x Oneway Bearing

DOES NOT INCLUDE LARGER SPACER REQ'D FOR OUTRAGE G5 USE EXISTING SPACER
Image of split gear set parts

2 x gears included for Outrage 150T replacement

106T Replacement Plastic Gear For Outrage G5

UGT-S01 for Outrage 1 x Item

One Way Bearing & Hub for Outrage G5
Parts come as seen here

Outrage G5 Tail Shaft Assembly complete

Short Boom Kit Outrage G5
Why Not tray a short boom kit ? for the Outrage G5 run 325mm main blades instead of 350mm blades

Fits on existing Outrage Holes you can modify to fit flush or leave as shown here resting on gearbox bolts
Adds some bling to G10 frame version