Tel 0843 289 9681

Main Pages

Best Selling Products

Up Graded Carbon Fibre Main Blades fits 450 helis and Walkera 60

Up Graded Carbon Fibre Main Blades fits 450 helis and Walkera 60

£16.99 / €18.86

These Carbon Fiber Main Rotor Blades are made of very high quality. It is symmetrical high gloss finish and very durable. It is one of the most durable products on a helicopter. Its mounting holes are identical to the stock blades, thus allowing for easy installation.. Real carbon fiber product!

These composite blades are considered by many flyers as the best micro rotor blades money can buy. These ultra light blades are super smooth cutting through the air very smoothly The blades produce absolutely magnificent flying characteristics from superb stability to breath taking 3D performance.

The blade roots use brass inserts for longer durability of the blades.

Great for microhelicopters.
Walkera 60
3dx 450
superhero 450
T Rex 450

4.5 mm root thickness to blade grips



find out more

 

TFM-600-4 blades rotor head for 600 Size Helicopters

TFM-600-4 blades rotor head for 600 Size Helicopters

£169.99 / €188.69

This premium multi-blade rotor head is perfect for the scale helicopter. Its advanced plug-n-play design requires no swash-plate (follower) or special timing adjustments. Make your scale heli look great and fly without additional electronic stabilization.

Assembly required.
For our :Apache & BO-105 .
Other :Funkey Agusta a 109 ,Blackhawk ,Hughes 500 .

Use 500 head manual for assembly the only diff is screw location of the feathering spindles


find out more

 

T-Rex 3DX450 CNC Pulley Set [UGT-G02]

T-Rex 3DX450 CNC Pulley Set [UGT-G02]

£2.49 / €2.76

Description

CNC Pulley Set
T-Rex 450 Series
3DX-450se


find out more

 

Air Wolf cnc suspension landing gear

Air Wolf cnc suspension landing gear

£49.50 / €54.95

Model: Air Wolf cnc suspension landing gear
Description: This is special design from our Air Wolf 500 fuselage .Especially absorb force of gravity suspension string design .The landing gear from our precise CNC machine .it can easy install and use a micro servo control linkage and safty locked system .All cnc aluminium control arm are included .It can replace to Align ,Heliartist ,Century-rc .(Wheels not included)



find out more

 

UGTB06 4 Pc Tail Grip Bearings

UGTB06 4 Pc Tail Grip Bearings

£3.49 / €3.87

UGTB06 4 Pc Tail Grip Bearings
find out more

 

T Rex 450 Main Blade Grips Radial Bearings 4 x set for SX 450 head assembly

T Rex 450 Main Blade Grips Radial Bearings 4 x set for SX 450 head assembly

£3.75 / €4.16

SX 450 Main Blade Grips Radial Bearings 4 x set for SX 450 head assembly
For 4mm feathering spindle size.
sizes
2 x 4x7x2.5mm
2 x 4x8x4mm

find out more

 

Flybarless 2 x 4mm alloy washers for 4mm feather spindle

Flybarless  2 x 4mm alloy washers for 4mm feather spindle

£1.05 / €1.17

Flybarless 2 x 4mm alloy washers for 4mm feather spindle
find out more

 

T Rex 450 SE V2 Spares - Black Hard Dampers

T Rex 450 SE V2 Spares - Black Hard Dampers

£1.80 / €2.00

T Rex 450 SE V2 Spares - Black Hard Dampers
find out more

 

New Products

T Rex 250 Silver Carbon Frame Set NEW Sonix Product LOWER PRICED

T Rex 250 Silver Carbon Frame Set NEW Sonix Product LOWER PRICED

£16.00 / €17.76

Complete Silver Carbon Frame set as shown here in the image for the T Rex 250 Helicopter
Quality cut Silver carbon Fibre package.
IN STOCK NOW from Sonix
If you bought all the items seperate from other T rex 250 Align dealers the whole lot would cost £29.00 !!
Click for a larger view of the deal


find out more

 

4 Blade CNC Rotor Head For 500 size

4 Blade CNC Rotor Head For 500 size

£135.00 / €149.85

This is a multi blades rotor head special for the scale helicopter It design no swash-plate lock (follower) require .The total hight of the centre hub only 35mm ,It make your model great scale look and C/G lower for sport preformance .
Fits 500 size Helicopters for that great Scale look
Try pairing with the Gyrobot 700 Stabiliser


find out more

 

T Rex Sticky Gyro Gel

T Rex Sticky Gyro Gel

£6.35 / €7.05

Instructions:
?PU adhesive gel is a material that possess excellent vibration dampening characteristics, ideal for mounting gyroscopes, receivers, or other electronics in vibration prone areas. The gel can be re-used by cleaning off containment (such as dust) with water. Mild detergent can also be used to wash away oily residues. Once dried the gel will regain its adhesiveness. The PU adhesive gel is an ideal replacement for traditional gyro foam tape. Its excellent vibration dampening characteristic can minimize impact induced damages on electronics.

Specification:
?Material:PU
?Size:110x55x3mm

Accessories:
?PU adhesive gel x 1
?Hook & loop fastening tape x 2

PU Adhesive Gel
K10457A


find out more

 

Stainless Steel Puller Set for Motor Pinions

Stainless Steel Puller Set for Motor Pinions

£13.75 / €15.26

Stainless gear puller -- for motor pinion/gear Removing
It is ok for motor shaft diameter 0.9-3.5mm
Back in stock now 11-03-10


find out more

 

Model: Air wolf 450 CNC landing gear set

Model: Air wolf 450 CNC landing gear set

£29.99 / €33.29

Model: Air wolf 450 CNC landing gear set
Description: This is our CNC aluminium 7075 landing gear for 450 Airwolf ,It is converted to our air wolf 450 and also for Align and discontinue dealer Heli-artist version .

find out more

 

Apache AH-64

Apache AH-64

£460.00 / €510.60

The Apache AH-64A is the world first 600 size scale attack helicopter .It design by computer and precision cnc machine .Cnc machine provid detail panel line and precision scale .The kit included the base weapon set and cnc matel suspension front and rear scale landing gear ,The kit included special metal side main frame for Align 600 , Bullet -600 or any clone 600 .Also suitable for Logo-400/10 ,Swift-16 .The detail front sensor ,dummy machine gun are included .Factory painted military green colour .Two piece fuselage are easy and lower cost for shipping .
TFM-600-4 blades rotor head are perfect match for this model .

Length:1450 mm
width:360 mm
High:500 mm
28-02-10 in stock now
find out more

 

Gaui Hurricane 550 EP Helicopter Combo 90% ARTF Basic Combo + Motor + ESC !!

Gaui Hurricane 550 EP Helicopter Combo 90% ARTF Basic Combo + Motor + ESC !!

£255.00 / €283.05

The 30-size powerful EP helicopter from the creator of SHOGUN helicopters. Use 2 batteries from T-REX 450. Real winner!

Now, from the makers of the Zoom, Shogun and various other successful models, comes something much bigger – the Hurricane EP 550 electric helicopter. With an overall length of just over 1m, a main rotor diameter of 1110 mm and fitted with 50cm blades the Hurricane is just a little smaller than a 30-sized helicopter and suitable for beginners and intermediate pilots alike. One small point for anyone new to the sport is that this helicopter uses eCCPM (Electronic Cyclic and Collective Pitch Mixing) so a suitable transmitter will be required although most have this facility these days. The model comes under the category of ARTF (almost ready to fly) although ‘partially assembled’ might be more accurate since installing the radio gear on any model takes a good few hours.

Features:

The Lightest-weight medium-sized EP helicopter.
Flying weight 1950g.
The best power to weight ratio gives excellent 3D capability .
Lowest price for battery cost in its class. Use 2 of 3S batteries in series.
Multi-stage gear reduction system delivers high power and results in a streamline cabin and canopy.
Push-pull linkages on ECCPM system limits any play for sharp control response.
Plastic and fiberglass composite main frame made from Dupont aviation engineering plastic for light weight and outstanding durability
Precision CNC anodized aluminum swash plate.
Fully equipped ball bearings ( total 43 bearings)
New Seesaw head design with Bell-Hiller system.
CNC aluminum center hub
CNC aluminum swashplate
90% factory assembly.
Belt driven tail rotor.
Specification:

Specifications:

• Overall length: 1060mm (including cabin & canopy)
• Main rotor diameter: 1110mm
• Main blade length: 475~550mm
• Tail rotor diameter: 222mm
• Flybar paddle: 84*45*6mm
• Tail blade length: 80mm
• Overall height: 305 mm
• Overall width: 85 mm
• Motor: KV800 external brushless motor (included)
• ESC: 50A/25V (ESC included)
• Flying weight: 1950g (May vary depending on battery pack and RC gear)
• Main rotor blades: wooden 500mm(included) or fibre(option)

Items required for assembly:

• 6 (or more) channel heli-capable transmitter (with CCPM function)
• 4 servos (digital servo is recommended)
• 6 (or more) channel receiver
• Gyro (heading hold gyro is recommended) GY 401 we sell ideal !! and great price
• Battery : 2 packs of Li-Po batteries (11.1v/2200mah )
• Charger: Li-Po battery charger Imax B6 ideal choice




find out more

 

METAL CASE G401B Version NEW Product

METAL CASE G401B Version NEW Product

£39.99 / €44.39

Same Features as Plastic Case G401B but with metal case for added crash protection.
Comes with instructions
find out more

 

Helivol Tool set (boxed)

Helivol Tool set (boxed)

£34.99 / €38.84

Selection of tools in attractive and practical tool box. Branded under the Helivol logo.
Product Specification:

Includes:
Pitch Gauge
Wire Cutters
Pliers
Ball Link Pliers
4.0mm Socket Driver
5.5mm Socket Driver
1.5mm Hex Driver x 2
2.0mm Hex Driver
2.5mm Hex Driver
Phillips Driver x 2
Flat Head Driver

find out more

 

Tel 0843 289 9681

NEWS MHW Magazine Features 500 Scale Sportsmoto Head

NEWS MHW Magazine Features 500 Scale Sportsmoto Head

Get the Magazine great article about the 500 Scale head Click to see the article this under upgrades multi blade heads

Flymentor 3D Help Pages for set up 24-10-09

Flymentor 3D Help Pages for set up 24-10-09

Dear NEW customers and existing Flymentor 3D owners we have put an informative PDF about our set up with the Flymentor 3D as a download. The settings we have used are for the 3DX450B helicopter and will also work with the SX450 Helicopter. This guide should help new and experienced pilots alike get to grips with the CCPM servo set up a lot faster than it took us.

Download Helpful PDF doc

Coming Soon Eagle Tree Remote Pilot systems

Coming Soon Eagle Tree Remote Pilot systems

Yes we are slowly adding to our web site remote flight equipment from Eagle Tree and other manufacturers wireless video equipment. We should be able to supply these items sometime in November 2009 so watch this space.

NEWS Sept 18-09-09 Large Sonix Gasser due out soon.

NEWS Sept 18-09-09 Large Sonix Gasser due out soon.

Sonix have announced a large Gasser for production in October 2009 and Sportsmoto Ltd will be supplying this Larger Petrol Engine powered helicopter to our customers.

Swinging either 690 or 790 mm main blades and 2 hour flight duration this will be ideal for UV use or specialist industrial helicopter users.

If you are interested in being one of the first to purchase one of the new gassers please contact us for more information Sonix Gasser Large Images of the 260 model


Lutz Focke Describes the Gyrobot 900 Potential and NEW Wing Version

Lutz Focke Describes the Gyrobot 900 Potential and NEW Wing Version

T Rex 250 settings now available to download for Gyrobot 900

Download the L F Technik T Rex 250 settings here click here

NEWS October 2009 SONIX 35C Lipo available soon

NEWS October 2009 SONIX 35C Lipo available soon

Use for T-REX 450 Helicopters
SPECIFICATION Continuous Discharge Rate: 35C MAX Discharge Rate: 60C Voltage: 11.1V Capacity: 2200mAh Size: 120x38x25 mm Weight: 202g(With Wire) Pack Configuration: 3S1P TP Balance Connector NO DEANS
Coming VERY SOON 29-10-09
Expect prices to be around £40.00 plus delivery

Parts for NEW Range of Helicopters HKH 450 6Ch 3D Helicopter Kit

Parts for NEW Range of Helicopters HKH 450 6Ch 3D Helicopter Kit

We have noticed a growing range of low cost helicopters (450 size) being sold on E-Bay that share a lot of the T Rex 450 3DX450 spares we sell like.

Gear sets
Blades Main & Tail Blades
Main Shaft
Boom 12mm
Belt Drive 397T
SX CNC 450 head and tail will fit
Plus Other spares


If you recently bought a HKH 450 6Ch 3D Helicopter Kit and need parts we have them at this Our Parts fit this helicopter in 3dx 450 / trex spares section click

Sundog Glasses great for model flying etc (not bad for Golf as well)

Sundog Glasses great for model flying etc (not bad for Golf as well)

05-08-09 we have agreed to become stockists of Sundog Sunglasses which are truly great glasses for flying.. These will be available from the end of August 2009 when the latest range of Sundogs arrive

Here's a bit about Sundog..

The Sundog Eyewear approach to integrating different technologies in design and construction result in a higher state of quality that is both functional and innovative. “Sundog Shaping Technology” results in frame fit that delivers optimal comfort with superior fit for a wide variety of head shapes and sizes. The incorporation of hydrophilic Megol contact points reduces pressure points and delivers adhesion with the skin for ultimate wear performance. 2009 represents Sundog Eyewear’s most functional collection ever, offering ultimate protection, superior sunglass comfort, genuine performance, and superior styling. Regardless of your choice, Sundog Eyewear provides excellent frame designs in open bottom, closed bottom and fl oating formats

22-07-09 Gaui 200 Stock

22-07-09 Gaui 200 Stock

Just a note to say that Gaui 200 Stock levels are high now all items shown under Expert Helicopter section Good Stock Levels Gaui Expert Helicopter Parts

GyroBot LF Technik products NEWS 09-04-09

GyroBot LF Technik products NEWS 09-04-09

Sportsmoto Ltd have become authorised dealers in the LF Technik products from Germany. the products are completely innovative in that the Gyrobot 900 can actually allow you to learn to fly aerobatics with hands off sticks control if it all starts to go wrong!

For more information

Sonix HC 500 Now Available Fantastic Changes to this 500 Helicopter Design 03-07-09

Sonix HC 500 Now Available Fantastic Changes to this 500 Helicopter Design 03-07-09

Another big step up in quality, performance from the awesome HDX450SE, the HC500 kit represents another hottest heli on the market with some CNC aluminum and fiber composite parts. This new 500-size heli is not as big as a T-REX 600 but just a bit bigger than a T-REX 450. Using 6S1P batteries that are widely used on T-REX 500 and 425mm blades, this is the ideal size for everyone who wants to have another kit besides the T-REX 450SE without spending tons of money on battery for T-REX 600. The quality and craftmanship is SUPERB!

This HC500 is an almost complete redesigned helicopter from HDX500SE by Charley Stephens and being intensively tested by world top 3D pilot Henry Caldwell. After months of testing and revising, the HC500 helicopter kit is finally at its optimized hard core 3D condition. Henry Caldwell said "This is the new HC 500. Charley Stephens reworked the hdx 500. I did all the testing for the improved heli. We decided to call it the HC 500, since I devoted alot of my time and feedback to the project. The HC 500 HAS alot of new features: new flybar cage for more flybar teeter without binding, new bladegrip arm that has a extra hole for adjustable ratio, new threaded flybar with new hc 500 paddle, new designed frames that will take sub- micro servos or mini servos, frames also have a adjustable battery tray for adjusting cg with battery, new designed canopy, shorter mixing arm that allows higher pitch applications, mainblade and tailblade grips have larger opening to accept standard blades

This heli can be docile to quick, it flys and tracks very well.

henry caldwell-"
Click to see full description of HC 500


NEWS HC (3DX500) 500 V3 SPARES MANUAL NOW ONLINE

NEWS HC (3DX500) 500 V3 SPARES MANUAL NOW ONLINE

The 3DX500 SE V3 manual is now available online to download. click this link
Added 04-06-09

Sportsmoto Ltd are Now dealers in LF Technik Helicopters and Gyrobot products
Check out the RoXXter 11 Helicopter in both Flybar Version and Flybarless Versions
Sportsmoto Ltd are Now dealers in LF Technik Helicopters and Gyrobot products

NEWS 26-05-09

We are pleased to be dealers of the LF Technik RoXXTer helicopters and will be adding all of the RoXXter Helicopters and Spare Parts very soon. If you would like to purchase a RoXXter helicopter please order at the web site or e-mail us .

Inverted Hover Tool Crash !!
Inverted Hover Tool !! May 2009

Inverted Hover Tool !! May 2009

Currently made to order but will soon be in production a 450 size (3dx450 -t rex 450) inverted flight hover tool. Must be used with training undercarriage for safety, this device can help you get started in 3D flight. Only to be used for hover practise but can get you acquainted with nose in hovers inverted ! With lower crash risks.

For more information see the product click here

NEW GT Power Servo & ESC Tester

NEW GT Power Servo & ESC Tester

In three modes to check Servos or ESC:

Manual mode – Turn the knob will different speed. Check the reaction time.
Neutral mode – Make the servo go back to the neutral point.
Automatic “window wiper” mode-make the servo swing like window wipers in the biggest angle.

It can connect 1 – 3 servos simultaneously and test such as 1- 3 servos consistency and so on.
It can also connect 1 – 3 ESC to test and compare their reaction time respectively.
It can connect 3 servos of the CCPM helicopters and select servos.
It can also connect the servo of airplanes install the steering-box and adjust planes by using such as the neutral mode and so on.
See the product now and video in use

NEW Blade 400 CNC Frame Options available from 07-03-09

NEW Blade 400 CNC Frame Options available from 07-03-09

Following on from the runaway success of our Blade 400 Upgrades the SONIX factory has now produced for us Black Carbon Fibre weave options and Silver Carbon Fibre Weave optional frame sets.

All spares and upgrade frames for these items will be available if you wanted to bling up your G10 frame set.

Check out the NEW Frames Now Large images available clicm me !

New Helicopter Magazine Helista

New Helicopter Magazine Helista

NEW! Helista Magazine…and its FREE!

http://www.rcheliresource.com/new-helista-magazineand-its-free/

Gaui 200 V2 This is a superb bit of kit

Gaui 200 V2 This is a superb bit of kit

Well i dont often get blown away with Helicopter stuff anymore , but i must say that the NEW gaui 200 SE V2 is a stunner right out the box. The QC is stunning and i mean stunning all of the bits that have to be fitted by you are top quality. Just watch you dont lose any parts as some of the screws are very small !

Read a review from Heli Freak recently posted.

Gaui 200 V2 SE FES Review

--------------------------------------------------------------------------------

Over all I am impressed with the heli, Its stable in a hover and is also an ultra capable 3d machine. So far the 3 axis gyro system is awsome, the tail is solid and the hover is more stable than my old 400. One thing i forgot to do was pull off the grips an redo the factory loctite job on the grip bolts before I flew it, so on the second pack it chucked a grip, but nothing was lost or damaged so with a little loc-tite and a couple of twists of the wrench she was up and away again. One thing I origionally overlooked was to set up the servos directions and enpoints BEFORE installing the gyro, so my first few attempts at flying it was nothing more than it constantly listing right on the ground or having no cyclic control once its was airborne, but after I did the correct set up its been smooth sailing from there. The heli is also quite durable, I found this out during my initial attempts at flying before I corrected the set up, I must have bounced it off of walls and the floor about six times and nothing but a set of landing gear broke and a grip bolt bent. This heli is also very light, all up w/batt it is a full 2oz. lighter than the T-rex 250, which, in a heli this size and weight ( 9.8 oz all up ) is a huge difference. This is a great heli for anyone looking to get into the 200-250 class, and with that my batts done chargin' Im gonna go fly!

Heli Freak Reviews

Gaui 200 nV2 Video Footage awesome 3D !!

Check this out !! You Tube Video of 3D Gaui 200 V2

Swashtool Buy 2-3-4 at once and save

Swashtool Buy 2-3-4 at once and save

NEW Feb 09 addition, why not buy a number of swashlevel tools at once and save.

Check our link here and see what's on offer.

Check out the multi swash tool purchase deal now click here

T Rex 600 One way bearing Removal Tool

T Rex 600 One way bearing Removal Tool

This tool allows you to easily and without damage to other parts , remove the one way bearing from the T Rex 600 Helicopter.
Made in the USA
In stock now SEE THE PRODUCT PRICING AND DETAILS FOR USE

Bevel Box Accurate Angle measurement tool

Bevel Box Accurate Angle measurement tool

If you need accurate angle adjustment this tool provides digital angle adjustment for Helicopter builders. Bevel box is a Mini Digital Protractor that provides digital reading between ±180.0 degree. Extra LCD is convenient to read. Itis real easy to be carried and used for its small and light . Measuring plane containing disk magnet material can stick to the surface measured. It is especially easy to measure bevel angle of miter saw. Great for Mother model builders , cars, boats etc. See the prodcuts Full Description now click here

Swash Level Tools

Swash Level Tools

Essential tool to level your swashplate. Why need to eyeball when you have a perfect tool?

With this swashplate leveler, you don't need to measure anything; just look to see if you can see light between the swashplate leveler and the swashplate. Trim till you can't see any space at either of the 3 balls. Very simple and no more eyeballing or measuring.

Also works on Blade 400 helicopters and HDX450 helicopters, Outrage G5 and all T-REX 450 size helicopters. Should also works with most swashplates that use 5mm main shaft.
Click Now to see the range of tools

Sportsmoto Ltd Company Number 6709642 Ltd in United Kingdom