Your cart: Items:, Value:

The Quanum telemetry system & Eagle Tree Products

Model Helicopters  | Electrics  | FPV Stuff |  The Quanum telemetry system & Eagle Tree Products

Eagle Tree Logger V4 Deans Version

Eagle Tree Logger V4 Deans Version


Price: 58.00 / 71.92

eLoggerTM V4 - the Easiest Way to Monitor your Power System!

New! Whether you’re into Electric Planes, Helis, Cars, Boats or other models, you need to know how your electric power system performs under actual operating conditions. The eLogger is the product you need to monitor your LiPo, A123 or any other electric power system.

Here are the key features of the eLogger V4:

Logs pack current to +/- 100 amps (150 amps with MPRV4-LEADS-150) and voltage from about 5 volts to 80 volts
Current is measured with a true Hall Effects Sensor - NOT a power robbing resistance shunt
Adjustable logging rate (from 50 samples per second to one sample every 5 minutes)
16 times the logging space of the standard eLogger V3, and lossless data compression. Typically logs all available sensors for about four hours, at 10Hz.
All data logged to permanent memory, which retains the data even when the power is removed
Fully compatible with our OSD Pro expander
Includes Y cable for throttle position logging
Great for bench monitoring of battery charging also!
Supports the PowerPanel LCD Display
Accepts optional inexpensive sensors for three Temperatures, RPM (brushless, magnetic or optical), Airspeed, Altitude, GPS, Servo Current, and more
Software computes Wattage, mAH, etc. for complete e-flight data.
Fully Compatible with Windows 7 (32 and 64 bit), Vista, 98SE, ME, Win2K and XP™
Weighs about 0.8 oz (22 grams). Versions with Wire Leads may weigh slightly more.
Comes with our state of the art Windows virtual playback display and graphing software
Powerful Graphing software has advanced charting features, such as amps vs volts
Internet Updatable firmware - as we add new features or (heaven forbid) have a firmware bug, the update is just a download away! No need to ship hardware back and forth.
Full support for English and Metric units.
Software has built in English, German and Chinese language. overview page click here

Quanum 2.4Ghz Telemetry System (Volt/Amp/Temp/mAh) V2

Quanum 2.4Ghz Telemetry System (Volt/Amp/Temp/mAh) V2


Price: 86.00 / 106.64

The Quanum telemetry system gives real-time and accurate voltage, current, mAh and temperature display plus low voltage warnings via a robust 2.4Ghz DSSS connection.
The receiver pannel is a large 132x64 LCD and attaches directly to your existing radios antenna for convenient at-a-glance in-flight status checks.
The Quanum Telemetry system will also warn you when your battery pack is approaching 3.2v per cell with a variable audio tone. No more deadstick landings!
And because its 2.4Ghz DSSS it wont interfere with your existing system, no matter what channel youre on!
The Quanum Telemetry system transmits a narrow, lightweight signal 4 times a second and uses DSSS technology to ensure no conflicts with other systems close by. Included is an inbuilt 450mAh Li-ion power source and a convenient in-car and PC USB charge jack!
Specification;
Tx Weight: 16g
Tx Size: 50x17.5mm
Tx Output: 20dBm <100mW 2.4Ghz DSSS
FCC ID: XR9V003

Included;
Large high contrast 132x64 pixel LCD 2.4Ghz Receiver. (V2)
1km Range 1~6S Transmitter (V2)
Receiver mount (universal type)
Cigarette lighter 5v out USB charger
USB cable. (Charge in car or on a PC)
CE, FCC, RoHS
Note: Current/temp sensor sold separately. below Larger Image More Detail please click

Quanum 2.4Ghz Telemetry System Temp/Amp add-on

Quanum 2.4Ghz Telemetry System Temp/Amp add-on


Price: 21.00 / 26.04

Quanum 2.4Ghz voltage telemetry transmitter Current & Heat Sensor

Spec.
Direct DC Only.
Current Sensor: 100A Max
Temp Measurement: -20~80Deg C

To be used with Quanum transmitter V2 module.

Quanum 2.4Ghz Flexible Antenna.

Quanum 2.4Ghz Flexible Antenna.


Price: 6.20 / 7.69

To be used with Quanum transmitter module.
Standard attachment fits most radio 2.4Ghz antenna location.
The flexible antenna actually has a slightly better range than the standard antenna and can be used in difficult or small locations such as glider fuselages.

Eagle Eyes FPV Base Station 2011 version

Eagle Eyes FPV Base Station 2011 version


Price: 63.34 / 78.54

e EagleEyesTM FPV Station integrates four of the main components you need for FPV on the ground, at a cost thats lower than many of the individual components presently available!

Features:
Receiver Diversity - when you connect two NTSC or PAL audio/video receivers (of any frequency), the EagleEyesTM picks the better signal at any given time, which can greatly reduce video fades and improve your FPV experience! A variety of diversity settings are configurable with the on-board switches and LED indicators.
Antenna Tracking - when coupled with our OSD Pro, the EagleEyesTM is the heart of a full-featured pan/tilt antenna tracker. Powerful, easy to use menus are provided for adjusting the EagleEyesTM to work flawlessly with the tracker of your choice. The built-in regulator drives even large pan/tilt servos, with no need for an external BEC.
Telemetry - When coupled with our OSD Pro, all Eagle Tree data (not just GPS position) are transmitted to your laptop, via your video transmitter and the EagleEyesTM USB port (separate USB cable required). Your flight can then be graphed and displayed with our powerful software, or visualized (either in real time or after your flight) with Google Earth!
Four Channel A/V Distribution - Ever wish you had more video/audio outputs? The EagleEyesTM has four built-in outputs!
Programmable Low Voltage Alarm - How is your ground station battery doing? Now you can program a low voltage alarm buzzer, which alerts you when your battery is below your chosen voltage. The buzzer can also be programmed to alert for other conditions, such as poor telemetry signal.

Two video inputs -NTSC/PAL, using your video receivers of any frequency. Video Input 2 is adjustable to match Video Input 1. Note that only one input needs to be used, if you are not using the Diversity feature.
Two audio inputs - Two monaural audio inputs are supported. Audio Input 2 is adjustable to match Audio Input 1. Note that only one input needs to be used, if you are not using the Diversity feature.
Four A/V outputs - Four video outputs (75 ohm) and four "line level" audio outputs
Power Input - Power input range approximately 6V to 14V. Barrel style power input with standard 2mm center pin.
Two Servo Outputs for pan and tilt trackers - Unit is capabable of delivering 5A burst output to drive even large pan/tilt servos.
USB Port for connecting to PC, for live PC display of telemetry and firmware update. Note: A standard USB "Mini-B" cable is required for these features, but not included.
Encasement - The EagleEyes board is protected by heavy duty, clear heatshrink. The EagleEyes does not include a plastic case at this time. A clear plastic case is planned for future release, and that should be compatibile with existing units. The case will be available for separate purchase.

GPS Expander for R/C V4 DataRecorder

GPS Expander for R/C V4 DataRecorder


Price: 62.00 / 76.88

New GPS Expander Module based on the latest GPS technology. Built-in LED which indicates 3D fix. Fast 10Hz update rate. Built-in battery backup for quick fixes.
Plugs into the eLogger V4 to provide live and/or recorded lat/lon, ground speed, GPS altitude, distance to pilot, course, UTC timestamp, and more. Integrated display/3D graphing software included in data system. WAAS and EGNOS compatible, built-in patch antenna.
NOTE: if you plan to use the GPS with your eLogger with 8S (approximately 30V) packs or higher, the Battery Backup Harness (CAB-BAT-BACK) is required.

Eagle Tree Video OSD Pro Expander

Eagle Tree Video OSD Pro Expander


Price: 71.44 / 88.59

n exciting and creative way to include data in your flight videos.
Eagle Tree OSD Pro system is completely modular.
Simply use your eLogger or Data Recorder, the OSD Pro Expander, and any additional sensors you want to display.
The OSD Pro is a powerful, modular, fully configurable Video/Audio On-Screen Display (OSD) device, providing graphics, voice announcements, alarms, acoustic variometer with total energy compensation, Home Arrow, Return to Home, Failsafe, RADAR, waypoints, a flight simulator for testing, and many other features. The information displayed can be as simple or advanced as you like, depending on how you configure the display, and on which optional Eagle Tree sensors are connected.
All parameters available with the eLogger V3 and Data Recorders + optional sensors will be supported for display on the OSD Pro.
Here are some examples:
GPS Parameters (Distance to Home, Home Arrow, GPS Altitude, Ground Speed,Course, and more)
Electrical Parameters (Pack Volts, Amperage, RX Volts, Servo Current, Milliamp-Hours, Watts)
Performance Parameters (Airspeed, Barometric Altitude, Climbrate, Variometer,Temperatures, RPM, G-Force, EGT, Jet ECU Status, servo positions)
Receiver Health (Dropped Frames, Antenna Fades, Missed Packets requires Spektrum or JR FlightLog compatible Receiver)
Call Sign, and many more

RPM Sensor with Four magnets EAgle Tree Systems

RPM Sensor with Four magnets EAgle Tree Systems


Price: 8.00 / 9.92

This RPM Sensor enables you to log the RPM of your RC model when connected to an Eagletree System.
The Sensor is used in conjunction with the 4 x magnets supplied, and measures upto 50K+ RPM...

Eagle Tree MicroPower E-Logger V2 / V3 Micro Temperature Sensor SKU: ET-TempSensor

Eagle Tree MicroPower E-Logger V2 / V3 Micro Temperature Sensor SKU: ET-TempSensor


Price: 8.00 / 9.92

Eagle Tree MicroPower E-Logger V2 / V3 Micro Temperature Sensor SKU: ET-TempSensor

Perfect for measuring temperatures of your batteries and ESC. 250 degrees F max temp. Up to two temperature sensors can be connected to the Eagle Tree MicroPower E-Logger V2 simultaneously, or up to 3 on the E-Logger V3.

Eagle Tree MicroPower E-Logger V1 / V2 / V3 Motor Temperature Sensor Loop SKU: ET-TEMP-LOOP

Eagle Tree MicroPower E-Logger V1 / V2 / V3 Motor Temperature Sensor Loop SKU: ET-TEMP-LOOP


Price: 7.50 / 9.30

Eagle Tree MicroPower E-Logger V1 / V2 / V3 Motor Temperature Sensor Loop SKU: ET-TEMP-LOOP

Model Helicopters  | Electrics  | FPV Stuff |  The Quanum telemetry system & Eagle Tree Products

Sportsmoto Ltd Company Number 6709642 Ltd in United Kingdom