£14.40 / €17.14

Remote control radio cnc support frame blue color:
you will get the same as following first pic item
( radio is not included, for application reference only)

find out more

£399.00 / €474.81

Professional aerial application designed 3-axis pan-tilt
Special design for Align Trex 550 600 700 , similar size heli work also large Gasser for example
Material : carbon fibre material
4pc servo is included in this package .
Easy to assemble.

You could try the FY-20A fitted to the stand for more servo activated stabilization

IN STOCK 24-08-10 AND LOOKS FANTASTIC
find out more

£69.99 / €83.29

Multi Blade 450 Size Helicopter head system
Fits most common 450 size helicopters and 5mm mainshaft
Comes with picture assembly manual from ourselves

IN STOCK
find out more

£129.00 / €153.51

The Brief Introduction of FY-20A Flight Stabilization System (called AFSS for short)
FY- Flight Stabilization System integrates the three-axis gyroscope, three-axis acceleration ,which make up a basic platform inertial navigation system .It can calculate the attitude of the model plane by a special algorithm .Once the FY- Flight Stabilization System detected there is change between the model plane’s present attitude and the horizontal attitude ,it will give a controlling signal to keep the model plane in a state of equilibrium .The FY- Flight Stabilization System can be used very easily. The manipulator just need to place the control stick in the middle of the remote controller, then the model plane could revert to the state of equilibrium .The FY- Flight Stabilization System can be used in any environment, such as indoors or any weather conditions .It dose not need any other initializtion .Just switch on the power then the model plane can fly to the sky stably. There are three control knobs for controlling--- elevator, aileron and directional channel.
The FY-A Flight Stabilization System is a very good helper for the learner .Because it can help the learner to control the model plane in a state of equilibrium .It is also useful for an experienced manipulator to control his model plane stably on a windy day. The FY- Flight Stabilization System can control a model plane which is not so stable, also can help you to finish the testing flight excellently.


Type: FY-20A can work in the following three modes.
Mode 1 : the closed mode of FY-20A ( manual mode). All the control of the model plane is determined by the manipulator. FY-20Adoes not participate in work completely.
Mode 2: the 3D mode. In this mode, FY-20A will give a controlling signal to keep the present attitude of the model plane, but it only stabilizes the control of three axes. So you can easily operate your model plane to complete a kind of movements steady.
Mode 3: Auto balance mode. FY-20A flight Stabilization System will give a controlling signal automatically to amend the model plane to the horizontal attitude once it detected the change between the present attitude and the horizontal attitude.


TechnicalTarget:
Working voltage: 4.0~6.0 Volt
Electric current: 52mA (5V)
Size: 55 x 33 x 20 mm
Weight(exclude electric wire):20g
Temperature range:-25°C~ +70°C
Maximum rate of rotating: = 1200 °/s
Applications as the following: normal fixed-wing plane,delta-winged plane with rudder, delta-winged plane without rudder rudder, plane without aileron, V –end plane with aileron, V-end plane without aileron.


Range of Application:
Robbe-Futaba PPM / PCM 1024 / PCM G3 mode;Graupner/JR PPM 8, PPM 12, SPCM mode;
MPX PPM8, PPM 12 with UNI mode and other remote congtrollers using the standard of 1.5 ms neutral position.

FY-20A includes the followings:
•One FY-20A circuit board;
• Four groups of RC receiver connecting wire;
•A pair of double-sided adhesive sponge or magic Sticker;
• An instruction book of FY-20A Flight Stabilization System
The following parts are for the user of FY-20A, please read it carefully.

1. FY-20A Working principle
FY-20A measures the present flying attitude through the inertial platform which consists of three axis gyroscope and tri-axial accelerometer. when is under the balance controlling , FY-20A will control the pitch attitude through elevating rudder , the roll attitude through ailerons and stably the course through the rudder .when the flight attitude out of the level ,the balance apparatus will give relevant of auto control gains to help the plane back to horizontal flight . when is in the 3D mode , the balance apparatus induce the rolling speed of three axis through gyroscope ,to show the auto control gain through relevant control rudder and prevent the rolling of each axis .So the plane will maintain the current attitude .

Gyroscope initialization:

The gyroscope of the balance apparatus normally does not need initialize .But once the bellowing situation happened, Please start initialization.
??Ban for a long time use .
??The temperature difference over 30 degrees after the using environments changed.
??In the auto balance mode,when horizontly arranged the balance apparatus , the control surface has deflection automatic.
The initialization process of the gyroscope: Put in the jumper for the gyroscope initialization. Power on the Flight Stabilization System and remains stationary, Keep it more than 20 seconds. Disconnect the power, unplug the jumper.

3. Application Connection Diagram
In gneral,the plane can auto back to balance when connected to the aileron channel and elevator channel,however connected to the rudder or not .When the rudder doesn’t connect to the FY-20A, connecte the rudder to the direction channel of the receiver .Please refer to the following picture for connection. Assume the receiver’s channel 1 outputs the aileron servo,channel 2 outputs the elevator servo, channel 3 outputs the throttle servo, channel 4 outputs the rudder servo, channel 5 is the switch channel for controlling which mode that the FY-20A work at .

Attention: FY-20A donot provide the differential-mode function of elevator and direction. And so the elevator and direction differential control V end plane must connect mixing device in the corroseponding differential channel.



find out more

£17.80 / €21.18

Spec.
Amp rating: 30A
Burst Rate (10sec): 40A
BEC Output : 5.0V / 3A
Voltage: 7.4-11.1V (2-3 cell Lipo/5-10 NiCd)
Dimensions: 43x23x6mm
Weight: 25g

Main Functions:
Safety mode: the motor wont start no matter what the position of the control stick is when switch on the RC unit.
Brake setting: On/Off (factory default is off)
Low current protection: Ignore/Reduce power/Shut off
Temperature protection: Reduce power when temperature reaches 120C
PWM frequency: 8Khz/16Khz
Three point battery type and low voltage selection.
Software reversion of motor turning selection.

find out more

£29.00 / €34.51

Take advantage and buy for all your helicopters or for friends all at once and save on our individual pricing of swashtools. You will get in this deal

1 x 450 Swash Tool 5mm shaft fits Blade 400, T Rex 450 SE versions also, 3dx500 and Helicopters with a 5mm main shaft
1 x 500 Swash Tool fits Lepton, T Rex 500 , 3dx500 and others
1 x 600 Swash Tool fits T Rex 600 size shafts
1 x 700 Swash Tool fits T rex 700 size shafts and swash plates


find out more

£9.45 / €11.25

330X Payload Mount Set
Model: 210815
Brand: GAUI
find out more

£29.99 / €35.69

Gaui Scorpion 2208-1050kv (330X S ) BL Motor
Model: 210410S
Scorpion Motor Orginal

Here by 24-08-10 latest

NOTE GOLD COLOUR AS PER KIT SUPPLIED
find out more

£23.40 / €27.85

Works with any model that has a threaded hole in the center of the head block. Including but not limited to:
T-rex 450
T-rex 500
T-rex 600
T-rex 700
Miniature Aircraft Stratus (and others with threaded hole)
(Adapter for the Miniature Aircraft Tempest will be available soon)
JR Vibe and Vibe 50
Hirobo Evo 90

Holds the flybar level while allowing the head to turn and pitch to be changed.

Unique standoff allows use on head blocks with a radius such as the T-rex 450 and 500.

Precisely indicates whether the swashplate is level or not.

Detects static CCPM interaction.

Not loads cheaper than other tools like flybarlock... compare our prices to others
Note 'Flylock ' is exclusive to Sportsmoto Ltd UK

find out more

£3.40 / €4.05

5 Minute Quality Epoxy Glue
Minute A/B Epoxy Glue.
A very high quality clear setting epoxy glue.
Excellent gap filling and bonding properties on almost all surfaces including delicate foam and hard to bond alloy.

Product comes in sealed air-tight packaging.
You wont find a better quality epoxy from China. In fact, its possible to find 20cent epoxy glues of the same size, however they dont dry clear and their holding strength and adhesion is very poor.
Our glue is produced by MIRA, one of Chinas leading glue manufacturers who supply glues to Chinas aerospace and civil engineering market, requiring strict quality and performance guidlines.
Save yourself the headache and only purchase quality glues.

An essential item for any building project and perfect for emergency in-field repairs
find out more

£45.00 / €53.55

SX 450 SE Superframe in Silver carbon Fibre.
Takes 12mm Boom
Takes wide range of Head and Tail Gearbox's for conversion to superframe from Superhero 450, Shark, 450 3dx 450 B , T Rex 450 models, etc.

Beautiful machining and top quality frame
all spares available

Option to buy with BLUE CNC Alloy available
find out more

£80.00 / €95.20

Instructions:
1.The 600M motor features shelterless design to create the advantages of heat release and low temperature variant.
The extended diameter for the rotor make it even more efficiency and high torque output.
2.The 600M motor armature had a special balance adjust to improve the serious shaking problem that other tiny motors have.
3.Maintenance free, high torque, high efficiency, stable and quiet.
4.High-speed ball bearings, powerful magnetic outrunner rotor.
5.Suitable for T-REX 600E helicopters. Suggested motor pinion gear: 14T for normal flights and 15T for 3D flights.

Specification:
?Input voltage:DC11.1V-22.2V 3-6cell Li-Poly
?Max continuous current:80A/95A(60sec)
?Max output power:1800W/2200W(60sec)
?KV value:1220KV
?Dimension: spindle F6xF43.6x59mm
?Weight: 310g (prox.)

Accessories:
?Socket screw(M3X10)X2
?Washer(F3XF8X1)X2


find out more

£11.99 / €14.27

The all new Turnigy temp checker now handles temp up to 356F! making it also reat for hot glow/gas engines!
Our Turnigy Infrared Thermometer can check the temperature of any Motor, ESC or battery simply by pointing and pressing the button. There is no need to make contact with the object!
An excellent way to check battery or motor temps!

Specifications.
Measuring Range : -33~180C (-27.4~356F)
Operating Range : 0~50C (32~122F)
Full Range Accuracy : +/- 2.5C, 2.5%
Distance :2~40cm
Emissivity Range : 0.95 fixed
Wave Length : 5um~14um
Power Supply : LR44X2

Display shown in Celsius/Centigrade & fahrenheit.
find out more

£29.99 / €35.69

Gaui Scorpion 2208-1050kv (330X S ) BL Motor
Model: 210410S
Scorpion Motor Orginal

Here by 24-08-10 latest

NOTE GOLD COLOUR AS PER KIT SUPPLIED
find out more

£399.00 / €474.81

Professional aerial application designed 3-axis pan-tilt
Special design for Align Trex 550 600 700 , similar size heli work also large Gasser for example
Material : carbon fibre material
4pc servo is included in this package .
Easy to assemble.

You could try the FY-20A fitted to the stand for more servo activated stabilization

IN STOCK 24-08-10 AND LOOKS FANTASTIC
find out more

£14.99 / €17.84

Overlander Extreme 40C 800mAh 11.1v. Lipo This pack fits perfectly into the Align T Rex 250 Heli or any other 250 size heli. Gives the heli pilot the opportunity to perform manouvers which until now have not been achievable. Awesome power This pack delivers power to the motor without any loss in voltage Described in review as a 'new baseline against which to measure lipo performance'. Awesome performance in a recent 1/18 scale competition out performing other batteries giving a 1m advantage after the first straight.

Product Use: Extreme 800 3S 11.1v 40C
Product Configuration: Lipo Sachet
Product Charge Rate: 2C
Product Discharge Rate: 40C
find out more

This pentad-blade rotorhead is designed for helicopters, its main shaft diameter is 8mm.
Materials: Aluminum 7075 and stanless steel
Status: Pre-assembled and ready to be intalled

Included:

1.5pcs CNC Blades Grip
2.CNC Rotor Hub
3.CNC Swashplate
4.CNC Arm Set
5.CNC Washout Base
6.Ball links
find out more

£159.99 / €190.39

The Turnigy® V-Bar 600 (v3) is an extremely high quality precise controller and stabilizer for the swashplate and tail rotor of a model helicopter flight control system. It has super-stabilization and highly responsive-to-control input. This makes for incredible stability and agility. The programmability allows for performance settings from smooth scale to sport or hard 3D flying. Flybarless also means longer flight times and a tremendous reduction of parts and aerodynamic drag. You no longer need to use an external tail gyro, resulting in reduced weight and cost savings. The Turnigy® V-Bar 600 offers 4 switchable flight modes.
Bundled with the V-Bar system is a programming box. Making setup a painless experience.

Specification:
MEMS Gyro Sensors in three axes
Digital signal processor
Operating voltage: 4-10 Volts, current < 80mA
Temperature range: -10°C to +50°C
Size: 33x34x18mm
Weight: 15g
Servo compatibility: 1520uS/333Hz, 1520uS/250Hz, 1520uS/167Hz and 760uS/333Hz digital servos, 1520uS/71Hz Analog servo.
Included;
Turnigy® V-Bar 600 (v3) Flybarless System
LCD programming Box
Double-sided adhesive foam & Stainless steel plate.

IN STOCK 14-06-10



Manual Link Try this
http://www.sportsmoto.co.uk/Turnigy-v-bar-600/962877048X39484X53.pdf
find out more

£115.00 / €136.85

The Range Finder 1000m+ can tell you the distance (height) of your plane for up to and beyond 1000 meters.
Ever wanted to know how far you are really flying? Now you can, with Sportsmoto Ltds new Range Finder.
Unlike other cheap Range Finders, ours is water and dust resistant and can cancel out rain and poor visibility issues such as smog and humidity.
This Range Finder uses high quality optics and a powerful laser to reach a distance of 1000m even on small objects.
Spec.
Effective range: 15~1099m
Measurement pattern: Semiconductor laser measurement (Harmless for eyes)
Tolerance: +- 1m +-0.1%
Pattern of measurement display: inner-vision-field LCD display
Objective diameter: 30mm
Field of view: 7degree
File coating: multiple file coating
Outlet pupil diameter: 3.6mm
Outlet pupil distance: 13mm
The pattern of alignment focus: Eyepiece focusing adjustment
Magnification: 8X
Vission field within 1000m: 122m
Measuring mode: Rain / RELF>150 / Standard mode if no display
Input voltage: DC 3V battery (Not included)
Water proof function: Nil
Dimensions: 148x96x58mm
Weight: 230g
Coming Soon in Sept
find out more

£64.00 / €76.16

Designed to Fit
T-rex 450SEV2,
T-rex 450SPORT,
T-rex 450PRO
450 Size............

Shaft Dimension : 5mm

including 120 CCPM swashplate / 4PCS Metal main blade grip / CNC Rotor Hub / CNC Washout Base / CNC Arm Set / Main Shaft

Pre-assembled and ready to be installed

Included :

1. CNC Rotor Hub
2. CNC Blades Grip x 4
3. CNC Washout Base
4. CNC Arm Set
5. CNC Swashplate
6. Main Shaft
7. Ball links

Limited qty in stock 15-06-10
find out more

This tri-blade rotorhead is designed for helicopters, its main shaft diameter is 10mm.
Materials: Aluminum 7075 and stanless steel
Status: Pre-assembled and ready to be intalled
Included:
3 pcs CNC Blades Grip
CNC Rotor Hub
CNC Swashplate
CNC Arm Set
CNC Washout Base
Ball links

find out more

£299.00 / €355.81

Attitude Flight Stabilization System (AFSS)
FY-21AP Version II is an advance Attitude Flight Stabilization System (AFSS) and Autopilot for RC aircraft.

The FY-21AP utilizes a 3-axis gyroscope and tri-axial accelerometer to form an accurate drift free attitude stabilization system. The unit also utilizes Global Positioning System (GPS) and a barometric altitude sensing for accurate 3-dimensional positioning of the aircraft. By combining attitude control and positioning, a comprehensive inertial navigation system and autopilot is provided to you in a small compact light-weight package.

Read More

Coming to stock soon


find out more

Brand New to our web site for 2010 the 3,4,5 blade 600 heads (5 blade vesion shown here)
Substantially engineered to a high standard and coating the Sportsmoto Ltd heads will be for sale very soon. We are currently testing this head on our T Rex 600 E for a scale project for a customer build.

For all enquires please contact us

Manufactured in Aluminium Alloy 7075 material

ALL PRODUCTS LISTED BELOW WITH NO BUY IT BUTTONS ARE COMING SOON
find out more

£12.70 / €15.11

T Rex 450 Pro Canopy D

Also fits HK 450 GT Pro
find out more

£12.70 / €15.11

Fits T Rex Pro
Also fits HK 450 GT Pro
find out more

£9.70 / €11.54

Fiberglass Canopy for Thunder Tiger Mini Titan Style 3
find out more

find out more