Turnigy Servos

Turnigy BLS950 Digital Cyclic Servo is designed specifically for strength, smooth response and ultimately extreme heli 3D flight performance.
This servo features a Brushless motor, which reduces friction and noise, increases motor life and operates at a lower temperature than a brushed motor plus it also gives a 30% faster response time and a less vibration which ads to servo accuracy. The micro-machined Titanium gear train with dual bearings ensures a strong and smooth meshing. If you open the servo case you will notice no machining marks on the gears. The mills that produce these motors work on extremely tight tolerances. You wont find these gears being produced in a Chinese countryside factory.
The TURNIGY BLS950 is comparable only to the very high-end Japanese servos.

Compatible with Super Narrow Pulse (760µs) drive.
Specification:
Dead band: 0.0008ms (Default)
Control System: +Pulse Width Control
Working frequence: 1520µs / 333hz
(RX) Required Pulse: 3.5 ~ 6.0 Volt Peak to Peak Square Wave
Operating Voltage: 4.0 ~ 6.0 V DC Volts
Operating Temperature Range: -10 to + 60 Degree C
Operating Speed (4.8V): 0.14 sec/60° degrees at no load
Operating Speed (6.0V): 0.12 sec/60° degrees at no load
Stall Torque (4.8V): 9.2 kg.cm (127.8 oz/in)
Stall Torque (6.0V): 11.5 kg.cm (159.7 oz/in)
360° Modifiable: NO
Motor Type: Brushless Motor
Potentiometer Drive: Indirect Drive
Bearing Type: Dual Ball Bearings
Gear Type: Titanium Gears
Programmable: NO @
Connector Wire Length: 24.0 cm (9.4 in)
Dimensions: 40 x 20 x 40 mm ( 1.57x0.79x1.50 in)
Weight: 55.8 g (1.96 oz) DRG of Servo Click Here

Turnigy 620DMG+HS High Torque Digital Servo (Metal Gear)10.6kg / .13sec / 52g

Double ball bearing (Si-oil)
CE Certified Strong 3 Pole Motor
Heavy duty sealed water proof case
Alloy heatsink
Digital signal design with 100% fitting square PWS
Automatic measures central ms
ALU 6061 alloy and C95 gear material
Digital IC (SOP package with 12bits transfer data)
MOS-FET driver (spirited driver able to push over 7A power)

Weight: 52g / 1.84oz
Dimensions: 40.5 x 20 x 42mm / 1.60" x 0.78" x 1.62"
Torque At 6.0V: 10.6kg/cm , 190 oz/in
Speed At 6.0V: 0.13 sec / 60° at no load
Operating voltage: 4.8 - 6.0V Servo Diagram Click Here

Turnigy BLS980 Digital Heli Rudder Servo is designed specifically for helicopter rudder operation.

This hyper fast digital servo is ideal for tail rotor control on helicopters as well as many other applications requiring the ultimate in response speed, yet still requiring good torque.
This servo features a Brushless motor that lasts longer and operates at a lower temperature than a brushed motor with 30% faster response times, smoother operation and Titanium gear train with dual XL bearings.

Compatible with Super Narrow Pulse (760µs) drive.

Suitable Gyros: Spartan DS760, Spartan Quark, Futaba GY611, GY601, GY520, ALIGN GP700, GP750, Mikado V-Bar Tail, CSM SL720, Curtis Youngblood Mini-G, Solid G, Thunder Tiger TG-7000

Specification:
Dead band: 0.0004ms (Default)
Control System: +Pulse Width Control
Working frequence: 760µs / 560hz
(RX) Required Pulse: 3.5 ~ 6.0 Volt Peak to Peak Square Wave
Operating Voltage: 4.0 ~ 6.0 V DC Volts
Operating Temperature Range: -10 to + 60 Degree C
Operating Speed (4.8V): 0.04 sec/60° degrees at no load
Operating Speed (6.0V): 0.03 sec/60° degrees at no load
Stall Torque (4.8V): 2.5 kg.cm (34.7 oz/in)
Stall Torque (6.0V): 3.1 kg.cm (43.0 oz/in)
360° Modifiable: NO
Motor Type: Brushless Motor
Potentiometer Drive: Indirect Drive
Bearing Type: Dual Ball Bearings
Gear Type: Titanium Gears
Programmable: NO @
Connector Wire Length: 24.0 cm (9.40 in)
Dimensions: 40 x 20 x 40 mm ( 1.57x0.79x1.50 in)
Weight: 58.0 g (1.97 oz)

in stock June 2010

Model: TGY-2216MG
Voltage: 4.5 - 6v
Speed: .16s
Running Current: 180mA
Torque: 3.1kg/cm
Gears: Metal
Weight: 16.2 ± 0.2 grams (without servo horn)
Narrow dead band width.

*Image shows HB spec, however this listing IS for an MG spec (Full metal gear) version. There is no visual difference between the MG and HB.

In stock June 2010

Turnigy MG930 Digital Metal Gear Servo 3.6kg / 26g / 0.14sec

The Turnigy MG930 is a precision heli servo.
An excellent choice and a perfect fit for your HK-T500!

Weight: 26g
Dimension: 36.2*15.2*28.7mm
Stall torque: 3.6kg/cm (4.8V) - 4.5kg/cm (6.0V)
Operating speed: 0.14sec/60degree(4.8v) - 0.11sec/60degree(6.0V)
Operating voltage: 4.8-6.0V
Temperature range: 0- 55deg
Servo Plug: JR (Fits JR and Futaba) more information

Turnigy TG9, 9 gram micro servo.

Size : 23x11x29 mm
Voltage : 3v ~ 6v
Weight: 9g / 0.32oz
Speed : 0.12 sec/60(4.8V)
Torque : 1.6 kg-cm
Working Temp : -30C~60C
Teflon Bushing, 19cm wire, coreless motor
Servo arms & screw included

This product has been CE tested and approved.

Comes with plastic servo arms, great for lower cost repairs to small 300 400 450 helicopters

STOCK DUE SOON 15-10-09 Servo Diagram Click