Mini Titan Head and Tail assembly deal great saving buy together
Mini Titan Head and Tail deal as shown (not supplied with linkages) (tail gearbox not supplied with tail shaft you must use your existing tail shaft)
1 x E325 Head assembly
1 x E325 Tail Assembly
find out more
METAL CASE G401B Version NEW Product
Same Features as Plastic Case G401B but with metal case for added crash protection.
Comes with instructions
find out more
Pitch Rod setting tool
Introduction:
Model helicopter building instructions always state pushrod length as measured from ball centre to ball centre.
Determining this dimension using conventional measuring tools is not really much more accurate than estimating the length.
Whole new design! Just like a vernier caliper. Very easy to use.
Precision CNC made
7075 hardness aluminum.
Fit for both left-handed and right-handed person.
IN STOCK
find out more
Alien Command Advanced NEW Product FOR FLYBARLESS USE
Alien Command Advanced
CCPM Flight Stabilisation
More than just a flight stabilisation system...
•Full Alien Command CCPM flight stabilisation.
•120/140 degree swashplates.
•RC latency error reduction.
•Digital servo optimisation.
•CCPM geometry error correction.
•Flybarless system compatible.
How does it compare to other systems?:
Well it’s a lot cheaper, does a lot more, produces much smoother stabilisation and of course is a double edged sword because you can not only improve eCCPM but you can decide to use the stabilisation component or just switch off! Therefore once you are happy without the stabilisation components turn it off/remove it and just utilise all the other benefits to give yourself an exceptional smooth flight control.
Have we tried it?:
Of course we have set the unit using the software provided and it gives and incredible flight experience! Trex 450, 500 in 10mph + wind we could just leave the TX on the floor and leave at an altitude of 80+ meters with minimal drift – we were amazed.
RRP 123.49
find out more
5 Minute Quality Epoxy Glue
5 Minute Quality Epoxy Glue
Minute A/B Epoxy Glue.
A very high quality clear setting epoxy glue.
Excellent gap filling and bonding properties on almost all surfaces including delicate foam and hard to bond alloy.
Product comes in sealed air-tight packaging.
You wont find a better quality epoxy from China. In fact, its possible to find 20cent epoxy glues of the same size, however they dont dry clear and their holding strength and adhesion is very poor.
Our glue is produced by MIRA, one of Chinas leading glue manufacturers who supply glues to Chinas aerospace and civil engineering market, requiring strict quality and performance guidlines.
Save yourself the headache and only purchase quality glues.
An essential item for any building project and perfect for emergency in-field repairs
find out more
Sportsmoto Flybarless 500 Head system with Gaui GU365 Deal
Our New 500 size flybarless head comes as shown with an outrage Swashpalte fits most 500 Heli;s fits T Rex 500 SX 500 Lepton etc as shown
Supplied with Gaui GU365 stabi wroks great
find out more
Gaui -Cable Tie with Touch Fastener 17cm( Set of 4 ) 910022
Gaui -Cable Tie with Touch Fastener 17cm( Set of 4 ) 910022
find out more
Skookum SK360 Cyclic Gyro-Stabilizer Flybarless System with USB
Overview
Throw out your "1940’s-technology" mechanical flybar and replace it with a state of the art Digital Flybar. Rock solid hovering with a less complex, lighter rotorhead for more power or longer flight times!
The SK-360 Digital Flybar is a high performance, compact and lightweight electronic pitch and roll stabilizer for model helicopters of all sizes. Its function is to replace the traditional flybar (stabilizer bar) and its association linkages, boosting power, increasing flight times and reducing repair costs.
For 3D flying, dial up cyclic rates to the limit of blade stall, without losing any stability. This gives your heli lightning-quick 3D, with great performance in wind and a solid hover!
For Scale flying, cyclic rates can be dialed down for smooth, steady flight even in gusty wind. Both the look and the sound are more realistic. The SK360 flies great with 2, 3, 4, or 5 blades.
The SK-360 is a compact, single unit, and comes with a USB interface included. It weighs only 16 grams, and can be mounted upside-down, backwards, or rotated 90 degrees to fit in any heli.
The PC setup software lets you fully configure the swash mixing, servo motion, and stability. And, it's easy to upgrade the firmware at home so you'll benefit from any future product improvements with the click of your mouse. Plus, the setup software displays the precision PWM inputs and outputs, making it an excellent calibration tool for your servos and radio.
(Note: For nitro helis, the SK360 has now been tested up to 90 size)
Control Options:
· Adjustable Bell and Hiller ratio (direct vs. stabilized control)
· Adjustable roll (aileron) and pitch (elevator) rates
· Control feel is adjustable in-flight with optional Bank Switching & gain channel
Swashplate Options:
· Works with Digital or Analog servos
· Suitable for 120, 135/140, and 90 degree eCCPM, as well as mCCPM swashplates
· Swash Ring anti-binding algorithm
· Phase Trim adjustable to +-90°
· Swash servo-equalizing prevents uncommanded collective in aggressive maneuvers
High Performance:
· Synchronous, 12-bit precision (4096 step) PWM inputs from your radio
· Tightly grouped 12-bit servo PWM outputs for low swash motion error
· Super-accurate, crystal driven PWM timing
· Optional 125 Hz Digital servo frame rate
· Minimal lag (just a few milliseconds)
· Individually temperature compensated
· Wide input voltage range (up to 8.5 volts)
· Weight is only 16 grams
Package Contents:
· SK-360 Gyro unit
· Four receiver connection cables
· Four strips of 3M-4408tm mounting tape
· USB Interface with jumper
· USB Extension Cable
· CD with Interface Software
SK360 - Technical Specifications
Dimensions: 41 x 31 x 15 mm (1.6 x 1.2 x 0.6 in)
Weight (without cables): 16 grams (0.5 oz)
Operating Temp. Range: -5c to +45c
Operating Voltage: 3.6 to 8.5 VDC
Power Consumption: 28mA
Wiring Gauge: 22 or 24
Input Signals: 3-4 Channels (PWM 700-2300 us)
Servo Options: Analogue or Digital
Setup: USB interface, or by Transmitter Sticks
Field Gain Settings: Bell and Hiller Gain Dials, 0 - 100%
find out more
Skookum LCD Field Terminal for the SK360 SK-LCD
Skookum LCD Field Terminal for the SK360
find out more
iMAX QUATTRO B6 Super Charger
This is the iMax B6 Quattro charger.
The iMax Quattro B6 allows you to plug 4 batteries into on charger simultaneously, and it will intelligently and automatically charge all 4 of them at once to their maximum capacity. To top of it, the batteries being charged do not even need to have the same configuration. You can connect different chemistry (ni-mh/Ni-Cd/LiPo/LiFe) batteries into any of the charging ports.
Input: DC 11 to 15V
Power source: 12V DC (car battery)/ AC mains PSU (>200Watts0
Charger power: 50Watts, current is regulated accordingly.
Discharger power: 5 watts, current is regulated accordingly
Cell count: 1-15 Nicd/NiMH cells; 1-6S LiPo/Lilon/LiFe cells; 1-10 Lead-Acide cells (2V to 20V)
Current drain for balancing Lithoum: 300mA
Charge termination: automatic, negative delta peak method for NiCd/NiMh; and automatic, voltage-dependent, CC-CV process
Dimensions: 225.4 x 158.6 x 62.4mm
Net weight: 1.09kg
Includes:
1 x charger
1 x pair alligator clips for Pb battery
1 x alligator to bullet connector cable
1 x JST to bullet connector cable
1 x Futaba to bullet connector cable
1 x Tamiya to bullet connector cable
1 x bullet connector with wire
1 x TP/FP adaptor
1 x XH adaptor
1 x instruction manual
In stock around 25-03-10 pre order
find out more
4 Blade CNC Rotor Head For 500 size
This is a multi blades rotor head special for the scale helicopter It design no swash-plate lock (follower) require .The total hight of the centre hub only 35mm ,It make your model great scale look and C/G lower for sport preformance .
Fits 500 size Helicopters for that great Scale look
Try pairing with the Gyrobot 700 Stabiliser
find out more
Sportsmoto Flybarless 500 Head system with Gaui GU365 Deal
Our New 500 size flybarless head comes as shown with an outrage Swashpalte fits most 500 Heli;s fits T Rex 500 SX 500 Lepton etc as shown
Supplied with Gaui GU365 stabi wroks great
find out more
Stainless Steel Puller Set for Motor Pinions
Stainless gear puller -- for motor pinion/gear Removing
It is ok for motor shaft diameter 0.9-3.5mm
Back in stock now 11-03-10
find out more
NEW 325 mm Align Style (not Align Brand) Sonix CF Blades
New March 2010 Sonix 325mm Carbon Fibre and white painted main Blades for 450 helicopters
Nice finishand well balanced right from the start
find out more
2 in 1 Magnetizer and Demagnetizer Tool
This little tool will magnetize your scredriver heads in an instant. Great for inserting screws into those hard-to-reach places.
This item also demagnetizes items.
find out more
Tool Bit set for Dremel Tools
Great Compact set of tools for your Dremel
Low cost and handy to use
find out more
METAL CASE G401B Version NEW Product
Same Features as Plastic Case G401B but with metal case for added crash protection.
Comes with instructions
find out more
Helivol Tool set (boxed)
Selection of tools in attractive and practical tool box. Branded under the Helivol logo.
Product Specification:
Includes:
Pitch Gauge
Wire Cutters
Pliers
Ball Link Pliers
4.0mm Socket Driver
5.5mm Socket Driver
1.5mm Hex Driver x 2
2.0mm Hex Driver
2.5mm Hex Driver
Phillips Driver x 2
Flat Head Driver
find out more
Turnigy 4mm Ball End Reamer
-4mm.jpg)
Turnigy 4mm Ball End Reamer
Ultra strong steel tip, wont break or round like other cheap drivers.
Lightweight, hollow alloy handle means it wont weigh down your R/C gear case.
find out more
Tel 0843 289 9681
| ||
| ||
 Apache AH 64 from Sportsmoto for Align 600EIn 2009 Smart model designed the all NEW Fiberglass Apache AH 64 for the popular T Rex 600 EP BELT version Model Helicopter as well as the following, Swift 16 / Logo 400 / Logo 10 | ||
 Full Range of Smartmodel Fuselages availableWe supply all of the smartmodel range of Fuselages , just contact us and tell us which fuselage you require and we will either have it in stock or can get it for you Fuselages 450, 500, 600 , 700 and 800 sizes available. | ||
 In STOCK Flymentor 3DNew type of sensing process provides reliable geographical positioning, completely independent of the visible horizon. This a brand new Product only Just released August 2009. attractive pricing for a lot of technology! Read More about this products launch | ||
 Heli Artist Fan SystemCheck it out ! click here | ||
Alien Command Advanced Great productAlien Command Advanced | ||
 FREE Tips Going Flybarless on a Budget !We recently took a lead from Dennis Stretton at Model Helicopter World Magazine who recently reviewed the LF Technik Sportsmoto supplied Gyrobot 900 for us Sept Issue. | ||
 FLYCAM L4500 Mount For 400, 450 & 500 Size HelicoptersFLYCAM Artist L4500 lightest complete camera mount 180g only. | ||
| ||
 Gaui Hurricane EP200SEV2 + ESC + MotorThe only and the best 3D capable micro helicopter reduces the 3D flying cost (Even 7.4V/2S1P/LiPo battery can provide the most powerful maneuver than other helicopters which use 11.1V/3S1P/LiPo battery in this class). | ||
 SX 500 Latest DesignWhy not try a SX 500 This is a great stable helicopter that can fly in wind that 450's just cannot hack. If your just starting out and want something bigger than a T Rex 450 or 3DX450 or Mini Titan , then the 3DX500 SAS and SAH are just what the doctor ordered. | ||
 SONIX SX 450 SE Available NowNOW In Stock the SX 450 SE Helicopter. | ||
 Lander Aircraft Now AvailableLander Aircraft available from Sportsmoto.co.uk check out the lander web site Lander Information click | ||
 Sportsmoto Ltd UK dealers in LF Technik Products | ||
 Sportsmoto Ltd agrees to be a Sundog Model Glasses DealerREAD ABOUT SUNDOG GLASSES FOR MODEL FLYING | ||
 T REX 250 SPARES NOW AVAILABLECheck out our cost saving crash parts for the T Rex 250 Helicopter. Main shafts, Feathering spindles, flybar rods , main blades, all lower cost than genuine Align. made by SONIX great quality as always and lower cost flying. CLICK HERE TO SEE THE T REX 250 SPARES ALSO NOW T REX 250 SILVER CARBON FRAME SETS !!! | ||
 Make sure you subscribe FREE to Helista Helicopter MagPut this on your 10 things to do before you die !! FREE and very good the online NEW magazine from Helista. | ||
 NEW Blade 400 Frame Options Check them out..Following on from the huge success of our Blade 400 Frame sets in G10 comes the Carbon Fibre options in Silver weave and Black weave. | ||
| ||
 Honey Bee King 2 K2 SX Head Upgrade NEW 2009Check out the NEW SX K2 CNC Head upgrade for the King 2 Honey Bee , includes the correct swashplate for the conversion. | ||
 Check out the 3DX450 Range of Helicopters from Sportsmoto 2009 V4 versions in stockOur Best seller by far the 3DX450B Helicopter from SONIX | ||
 Thunder Tiger Mini Titan Upgrades in CNC alloy
| ||
 T Rex 600 & 500 CNC Upgrade Parts Great Value OfferT Rex 600 CNC upgrade parts for your T Rex Helicopter. Order a combo to save on buying individually..Buy On Line Now these are now available in black and matt alloy finish | ||
 Tools to help you set up a great flying helicopter are essentialOur Carbon Fibre and CNC alloy Blade Balancer is just the ticket for setting up 400/450 and some 500 helicopter main blades. | ||
 Payments by Pay Pal account or Credit CardYou can easily pay for your goods online with Pay Pal. Either by having a Pay Pal account or using the option of credit card via Pay Pal. Get a Pay Pal Account Now Pay Pal accepts VISA Mastercard, American Express all very easy to use and buy online | ||
 Tail assembly Compatable T Rex Parts availableCheck out the quality of the CNC machined parts for the T Rex and 3DX 450 compatable spares |
Mini Titan Head and Tail assembly deal great saving buy together Mini Titan Head and Tail deal as shown (not supplied with linkages) (tail gearbox not supplied with tail shaft you must use your existing tail shaft) |  | METAL CASE G401B Version NEW Product Same Features as Plastic Case G401B but with metal case for added crash protection. | | Pitch Rod setting tool Introduction: |
| ||||
Alien Command Advanced NEW Product FOR FLYBARLESS USE Alien Command Advanced | | 5 Minute Quality Epoxy Glue 5 Minute Quality Epoxy Glue | | V4 Blue Alloy Kit 3DX 450B Black G10 Fibre frame  |
| ||||
Sportsmoto Flybarless 500 Head system with Gaui GU365 Deal Our New 500 size flybarless head comes as shown with an outrage Swashpalte fits most 500 Heli;s fits T Rex 500 SX 500 Lepton etc as shown | | Gaui -Cable Tie with Touch Fastener 17cm( Set of 4 ) 910022 Gaui -Cable Tie with Touch Fastener 17cm( Set of 4 ) 910022 | | Skookum SK360 Cyclic Gyro-Stabilizer Flybarless System with USB Overview |
| ||||
Skookum LCD Field Terminal for the SK360 SK-LCD Skookum LCD Field Terminal for the SK360 | | | ||
| ||||
iMAX QUATTRO B6 Super Charger This is the iMax B6 Quattro charger. | | 4 Blade CNC Rotor Head For 500 size This is a multi blades rotor head special for the scale helicopter It design no swash-plate lock (follower) require .The total hight of the centre hub only 35mm ,It make your model great scale look and C/G lower for sport preformance . | | Sportsmoto Flybarless 500 Head system with Gaui GU365 Deal Our New 500 size flybarless head comes as shown with an outrage Swashpalte fits most 500 Heli;s fits T Rex 500 SX 500 Lepton etc as shown |
| ||||
Stainless Steel Puller Set for Motor Pinions Stainless gear puller -- for motor pinion/gear Removing | | NEW 325 mm Align Style (not Align Brand) Sonix CF Blades New March 2010 Sonix 325mm Carbon Fibre and white painted main Blades for 450 helicopters | | 2 in 1 Magnetizer and Demagnetizer Tool This little tool will magnetize your scredriver heads in an instant. Great for inserting screws into those hard-to-reach places. |
| ||||
Tool Bit set for Dremel Tools Great Compact set of tools for your Dremel | | METAL CASE G401B Version NEW Product Same Features as Plastic Case G401B but with metal case for added crash protection. | | Helivol Tool set (boxed) Selection of tools in attractive and practical tool box. Branded under the Helivol logo. |
| ||||
Turnigy 4mm Ball End Reamer Turnigy 4mm Ball End Reamer | | | ||
| ||||
Sportsmoto Ltd Company Number 6709642 Ltd in United Kingdom
